TYAN THUNDER K8HR Manual page 55

3.5.9 – Hyper Transport Configuration Sub-Menu
You can use this screen to view the Hyper Transport Configuration Menu.
Use the Plus and Minus (+/-) keys to change the value of the selected option.
The settings are described on the following pages.
Main Advanced
Hyper Transport Configuration
CPU0: CPU1 HT Link Speed
CPU0: CPU1 HT Link Width
CPU0: HT2000 HT Link Speed
CPU0: HT2000 HT Link Width
HT2000: HT1000 HT Link Speed
HT2000: HT1000 HT Link Width
Feature
Hyper Transport Configuration
CPU1: CPU2 HT Link Speed
CPU1: CPU2 HT Link Width
CPU1: HT1000 HT Link
Speed
CPU1: HT1000 HT Link Width
BIOS Setup Utility
PCI/PnP Boot
[N/A]
[N/A]
[Auto]
[Auto]
[Auto]
[Auto]
Option
Auto
200MHz
400MHz
600MHz
800MHz
1GHz
Auto
2 Bit
4 Bit
8 Bit
16 Bit
Auto
200MHz
400MHz
600MHz
800MHz
Auto
2 Bit
4 Bit
8 Bit
55
http://www.TYAN.com
Security Chipset
The Hyper Transport
link will run at this
speed if it is slower
than or equal to the
system clock and the
board is capable.
← → Select Screen
↑↓ Select Item
+/- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Description
Specifies CPU1 to CPU2 Hyper
Transport Link Clock frequency.
If CPU2 is absent, the selection
item will be hidden.
Specifies CPU1 to CPU2 Hyper
Transport Link Data width.
If CPU2 is absent, the selection
item will be hidden.
The Hyper Transport link will
run at this speed if it is slower
than or equal to the system
clock and the board is capable.
The Hyper Transport link will
run at this width.
Exit