3.5.12 – Remote Access Configuration Sub-Menu
You can use this screen to view the Remote Access Configuration Menu.
This feature allows access to the Server remotely via serial port. Use the up and
down arrow ( / ) keys to select an item. Use the Plus and Minus (+/-) keys to
change the value of the selected option. The settings are described on the
following pages.
Main
Advanced
Configure Remote Access type and parameters
Remote Access
Serial port number
Base Address, IRQ
Serial Port Mode
Flow Control
Redirection After BIOS POST
Terminal Type
VT-UTF8 Combo Key Support
Sredir Memory Display Delay
Feature
Configure Remote Access type and parameters
Remote Access
Serial port number
Base Address, IRQ
Serial port Mode
Flow Control
BIOS Setup Utility
PCI/PnP
Boot
[Enabled]
[COM1]
[3F8h, 4]
[115200 8,n,1]
[None]
[Always]
[ANSI]
[Enabled]
[No Delay]
Option
Enabled
Disabled
COM1
COM2
Read only
115200 8,n,1
57600 8,n,1
38400, 8,n,1
19200 8,n,1
09600 8,n,1
None
Hardware
Software
58
http://www.TYAN.com
Security
Chipset
Select remote access
type.
← → Select Screen
↑↓ Select Item
+/-
Change Field
F1
General Help
F10 Save and Exit
ESC Exit
Description
Enables remote access to system
through serial port.
Selects Serial Port for console
redirection. Make sure the
selected port is enabled.
Shows the IRQ of the selected
Serial Port.
Selects Serial Port settings.
Selects Flow Control for console
redirection.
Exit