TYAN THUNDER K8HR Manual page 44

3.5.2– IDE Configuration Sub-Menu
You can use this screen to select options for the IDE Configuration Settings.
Use the up and down <Arrow> keys to select an item. Use the <Plus> and
<Minus <Minus> keys to change the value of the selected option.
Main Advanced
IDE Configuration
Onboard PCI IDE Controller
Primary IDE Master
Primary IDE Slave
Hard Disk Write Protect
IDE Detect Time Out (sec)
ATP(PI) 80Pin Cable Detection
Feature
IDE Configuration
Primary IDE Master/Slave
IDE Detect Time Out (Sec)
BIOS Setup Utility
PCI/PnP Boot Security
[Both]
[xxxx]
[xxxx]
[Disabled]
[35]
[Host & Device]
Option
Auto
While entering Setup, BIOS auto detects
XXXX
the presence of IDE devices. This
displays the status of auto detection of
Not Installed
IDE devices.
Enabled
0~35 Selects the time out value for detecting
(at 5 interval) ATA/ATAPI device(s).
44
http://www.TYAN.com
Chipset Exit
[Disabled] : disables the
integrated IDE
controller.
[Primary] : enables only
the primary IDE
controller.
← → Select Screen
↑↓ Select Item
+/- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Description