Boot Features - TYAN TEMPEST I5000VF Manual

3.2.3 Boot Features

This option allows setting boot parameters. Press Enter to view the Boot
Features screen.
Main
Floppy check:
Summery screen:
Boot-time Diagnostic Screen:
QuickBoot Mode:
Extended Memory Testing
F1 Help ¡ ô ¡ õ
Esc Exit ¡ ö ¡ ÷
Floppy Check
This feature is used to verify floppy type on boot. Selecting "Disabled" will speed
the boot process.
Disabled / Enabled
Summary Screen
Enables or disables the display of the summary screen during boot up.
When Summary Screen is Enabled (the default), a Phoenix BIOS Setup Utility
summary screen appears during system boot after the power-on self-test
(POST). The summary screen lists many of the system setup settings. When
this option is set to Disabled, the summary screen does not appear.
Enabled / Disabled
Boot-time Diagnostic Screen
This feature is used to display the diagnostic screen during the boot process.
Enabled / Disabled
Quick Boot Mode
This BIOS feature allows you to decrease the time it takes to boot up the
computer by shortening or skipping certain standard booting procedures.
If enabled, the BIOS will shorten the booting process by skipping some tests
and shortening others. In addition, it will also perform the following to further
speed up the booting process:
Spin up the hard disks as soon as power is supplied (or as soon as
possible)
Initialize only critical parts of the chipset
PhoenixBIOS Setup Utility
Advanced Security
Boot Features
Select Item -/+
Select Menu Enter
Power
[Disabled]
[Enabled]
[Enabled]
[Enabled]
[Just zero it]
Change Values
Select
Sub-Menu
39
Boot Exit
Item Specific Help
Enabled verifies floppy
type on boot; disabled
speeds boot.
F9 Setup Defaults
F10 Previous Values