Installing The Memory - TYAN TEMPEST I5000VF Manual

2.6 - Installing the Memory

Before installing memory, ensure that the memory you have is compatible
with the motherboard and processor. Only DDR2-667/533 FB DIMM
modules are required. Check the TYAN Web site at: www.tyan.com for
details of the type of memory recommended for your motherboard.
The following diagram shows common types of FBD memory modules.
Key points to note before installing memory:
•
Only DDR2 667/533 FB-DIMM ECC memory modules are supported.
•
All installed memory will automatically be detected and no jumpers or
settings need changing.
•
The Tempest i5000VF S5370 supports up to 16/8GB DDR2-533/667
FB-DIMM of memory.
The S5370 only supports DDR2 Fully Buffered DIMM.
Registered Memory Module is NOT supported.
Notes
23