Related Manuals for Viavi SC 4800
Summarization of Contents
Chapter 1 Overview
About the instruments
Provides a general description of the test instruments covered in this manual.
Features and capabilities
Details the various features and capabilities of the instruments.
Configuring your instrument
Explains how instruments are factory-configured and how to customize them.
What ships with your instrument?
Lists the typical items included with the instrument upon purchase.
Unpacking the components
Provides instructions on how to unpack instrument components.
Inspecting the components for damage
Guides users on how to inspect components for damage after unpacking.
Accessories
Lists available accessories for the instruments.
Optional Expansion Modules
Details available optional expansion modules for the product families.
About the T-BERD or MTS 5800, SC 4800 and MAP-2100
Provides information about the T-BERD/MTS 5800, SC 4800, and MAP-2100 testers.
Configuring the T-BERD / MTS 5800 and SC 4800
Explains the factory configurations for T-BERD/MTS 5800 and SC 4800 units.
Chapter 2 Assembling Your Instrument
Preparing for assembly
Provides instructions on preparing for instrument assembly.
Connecting a DMC to a base unit
Guides on connecting a DMC to a T-BERD/MTS 8000 base unit.
Inserting MSAMs or CSAMs into the 6000A base unit or DMC
Instructions for inserting MSAMs or CSAMs into the base unit or DMC.
Inserting, removing, and swapping PIMs in the MSAM
Details on inserting, removing, and swapping PIMs within the MSAM.
Handling CFP adapters and transceivers
Provides guidance on handling CFP adapters and transceivers.
Handling SFP/SFP+, XFP, and QSFP+ transceivers
Provides guidance on handling SFP, SFP+, XFP, and QSFP+ transceivers.
Attaching an external optical connector
Instructions for attaching an external optical connector to the instrument.
Disconnecting the DMC
Provides instructions on how to disconnect the DMC from the base unit.
Chapter 3 Getting Started
Powering the instrument
Explains how to power the instrument using the battery or AC adapter.
Launching the MSAM or CSAM
Instructions on how to launch the MSAM or CSAM modules.
Navigating the user interface
Describes how to navigate the instrument's user interface.
Setting up the instrument
Covers instrument setup including software, screen saver, and display settings.
Connecting your instrument to the circuit
Provides guidance on connecting the instrument to the circuit for testing.
Configuring Expert Optical settings
Explains how to configure expert optical settings for critical applications.
Browsing the web
Instructions on how to use the instrument's web browser.
Connecting to WiFi
Provides steps to connect the instrument to a WiFi network.
Playing videos
Explains how to use the instrument's video player.
Setting up the Job Manager
Details on configuring the Job Manager for test and report information.
Chapter 4 Basic Testing
Preparing to test
Guidelines and considerations before starting a test.
Step 1: Selecting a test application
Describes methods for selecting a test application.
Step 2: Configuring a test
Covers displaying setup screens and specifying test settings.
Step 3: Connecting the instrument to the circuit
Provides guidance on connecting the instrument to the circuit.
Step 4: Starting the test
Explains how to start a test and use action buttons.
Step 5: Viewing test results
Details on how to view test results, including groups and categories.
Running multiple tests
Instructions for running multiple tests simultaneously.
Scheduling timed tests
Explains how to schedule tests to run at specific times or durations.
Creating and printing reports
Guides on creating, formatting, and printing test reports.
Restoring test defaults
Describes how to restore test settings to factory defaults.
VT-100 emulation
Explains how to use the VT-100 terminal emulation feature.
HTML Viewer
Instructions on using the instrument's HTML viewer.
Optical Switch on MAP-2100
Details on the optical switch functionality for the MAP-2100.
Chapter 5 Smart Access Anywhere
About Smart Access Anywhere
Overview of the Smart Access Anywhere utility.
Licensing
Information about licensing for the Smart Access Anywhere utility.
Downloading and extracting the utility
Steps to download and extract the Smart Access Anywhere utility.
Establishing a connection
Guides on establishing a remote connection to the instrument.
Launching the utility
Instructions for launching the Smart Access Anywhere utility.
Displaying the instrument’s user interface
How to display the remote instrument's user interface on a workstation.
Transferring files
Instructions for transferring files between workstation and instrument.
Displaying and modifying connection settings
How to view and change remote connection settings.
Chapter 6 Using Bluetooth Connections
Setting up a Bluetooth connection
Steps to set up a Bluetooth connection between devices.
Transferring files via Bluetooth
Instructions for transferring files using Bluetooth.
Using a Bluetooth audio device
Details on connecting and using Bluetooth audio devices.
Disconnecting and unpairing Bluetooth devices
How to disconnect and unpair Bluetooth devices.
Deactivating Bluetooth
Instructions on how to deactivate Bluetooth communication.
Chapter 7 Generic Tests
Testing Optics and Cables
Information on testing optics and cables using self-tests.
Troubleshooter
Description of the Troubleshooter feature for analyzing failing tests.
Unframed BERT
Details on unframed BERT capability for multi-lane interface testing.
Chapter 8 Optical Tools
About the optical tools
Overview of the optical tools available for T-BERD/MTS 5800.
Inspecting fiber
Instructions for inspecting fiber cleanliness using the microscope accessory.
Measuring optical power
Guides on using the Optical Power Meter accessory.
Appendix A Specifications
T-BERD / MTS 5800 and Smart Class 4800 specifications
Physical, power, and electrical specifications for T-BERD/MTS 5800 and SC 4800.
MSAM specifications
Specifications for the MSAM and its available PIMs.
CSAM specifications
Details physical, power, battery, and optical specifications for CSAM.
DMC specifications
Provides physical, power supply, and battery specifications for the DMC.
Transceiver and adapter specifications
Information on transceiver and adapter specifications.
Environmental specifications
Details environmental specifications for various instrument models.
Appendix B Maintenance and Troubleshooting
Maintaining the T-BERD/MTS 5800 and SC 4800 batteries
Guidelines for maintaining rechargeable lithium-ion batteries.
Calibrating the T-BERD / MTS 5800 and SC 4800 touchscreen
Procedure for calibrating the touchscreen on T-BERD/MTS 5800 and SC 4800.
Viewing the System Info
How to view instrument internal component revisions and enabled options.
Enabling software options
Instructions on enabling purchased software options using an option key.
Updating the software
Methods for updating the instrument's software in the field.
About troubleshooting
Guidance on identifying and correcting instrument issues.
Assembly and setup
Addresses potential issues during instrument assembly and setup.
Operating the instrument
Troubleshooting common operating issues with the instrument.
Performing tests
Answers common questions about completing tests with the instrument.
Maintaining your instrument
Addresses questions regarding instrument maintenance and calibration.
Battery communication
Troubleshooting battery communication and gauge reading issues.
Need help?
Do you have a question about the SC 4800 and is the answer not in the manual?
Questions and answers