Other; Antenna Aiming; Surround Modes; Standard Playback - Denon AVR-2808 Owner's Manual

Shuffle
Make settings for shuffle mode.
[Selectable items]
Songs
: Shuffle all songs.
Albums
: Shuffle songs from current album only.
OFF
: Cancel shuffle mode.
This can be selected for input sources for which "Assign" is assigned
at the "iPod dock" setting.

Other

Make various other settings.
Video Select
Switch video input source while listening to audio signal.
[Selectable items]
DVD HDP TV/CBL SAT VCR
Select video input source to view.
Source
:
The video and audio for the same input source are played.
Operating from the main unit
Press the VIDEO SELECT button, then turn the SOURCE SELECT knob until
the desired picture appears.
b To cancel, press the main unit's VIDEO SELECT button, then turn the
main unit's SOURCE SELECT knob and select "Source" .
NOTE
• It is not possible to select HDMI input signals.
• When playing HDMI video input signals, the analog video signal of
another input source cannot be selected for the HDMI video output.
• Input sources for which "Delete" is selected at "Source Delete"
cannot be selected.
Video Convert
Automatically convert video input signal to monitor output format.
[Input source] DVD HDP TV/CBL
[Selectable items]
ON
: Enable conversion.
OFF
: Disable conversion.
Source Level
Corrects the playback level of the selected input source's audio input.
[Variable range]
For input sources for which "HDMI" and "Digital" are set at the menu
"Assign" setting, the analog input level and digital input level can be
set separately.
DVR V.AUX
:

Antenna Aiming

Adjust the XM radio reception sensitivity.
[Input source]
Satellite
Indicate satellite signal strength.
Terrestrial
Indicate terrestrial signal strength.
Display
SAT VCR DVR
V.AUX
–12dB ~ ~ +12dB
0dB
XM
Condition
Signal strength is strong
Signal strength is good
Signal strength is marginal
Signal strength is weak
No signal

Surround Modes

Standard Playback

This is the standard mode for enjoying surround sound according
to the program source.

Surround Playback of 2-channel Sources

To select these surround modes using the buttons on the main unit
and main remote control unit, press the STANDARD button. The mode
switches each time the button is pressed.
n When using a surround back speaker
[Selectable items] DOLBY PLgx DTS NEO:6
n When not using a surround back speaker
[Selectable items]
DOLBY PLg DTS NEO:6
DOLBY PLgx
: The signals are decoded in DOLBY PLgx or
DOLBY PLg
or DOLBY PLg for playback.
Cinema
: This mode is suited for movie sources.
Music
: This mode is suited for music sources.
Game
: This mode is suited for games.
Pro Logic
: This is the Pro Logic playback mode. This can
be selected when playing with a DOLBY PLg
decoder. When this mode is selected, "DOLBY
PL " is displayed.
DTS NEO:6
: The signals are decoded in DTS NEO:6 for
playback.
Cinema
: This mode is suited for movie sources.
Music
: This mode is suited for music sources.
neural
: It is possible to play analog input signals and
PCM (2-channel, 48 kHz or less) in the surround
mode.
This is the optimum mode for playing sources
recorded in XM HD Surround (vpage 63).
neural
neural