Connecting The Power Cord; Once Connections Are Completed; Menu Operations; Operations - Denon AVR-2808 Owner's Manual

Connecting the Power Cord

Wait until all connections have been completed before connecting the power cord.
NOTE
• Insert the AC plugs securely. Incomplete connections could cause noise.
• Only use the AC outlets to plug in audio devices. Do not use them as power supplies for hairdryers or
anything other than audio equipment.

Once Connections are Completed

Turning the Power On
(vpage 43)
Connection to the AC outlets
• These outlets supply power to external audio
devices.
• The power supplied from these outlets turns on and
off together with the set's power switch.
• Audio equipment with a total power consumption
of 120 W (1 A) can be connected.
To household
power outlet
Power cord
(AC 120 V, 60 Hz)
(included)

Menu Operations

With the AVR-2808CI, settings and operations for most functions can be performed by operating while
looking at the menus displayed on the monitor screen.
uiop
MENU ENTER RETURN
[ AMP]
MENU
ENTER
uiop
RETURN
About the button names in these explanations
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control
unit

Operations

The same operation is possible on the main unit
or remote control unit.
1
MENU
Press .
The menu is displayed.
b To operate from the main remote control unit,
be sure to set the remote control unit to the
AMP mode.
2
ui
Press to select the item you want
ENTER
to set, then press .
3
Press ui again to select the item you
ENTER
want to set, then press .
4
To change the setting:
ui
Press to select the item you want
to change, then press o p to change
the setting.
b To return to the previous item, press RETURN.
b Select "Default Yes" , then press o to reset to
the default setting.
5
ENTER
Press to enter the setting.
6
MENU
Press to finish.
When MENU is pressed, the settings made up
to that point are entered and the setting menu is
cleared.
0