Xm Connector; Antenna Terminals - Denon AVR-2808 Owner's Manual

Av surround receiver
Hide thumbs Also See for AVR-2808:
Table of Contents

Advertisement

XM connector

®
• The AVR-2808CI is an XM Ready
receiver. You can receive XM
Satellite Radio by connecting to the XM Mini-Tuner and Home Dock
(includes home antenna, sold separately) and subscribing to the XM
service.
• Plug the XM Mini-Tuner and Home Dock into the XM connector on
the rear panel.
• Position the Home Dock antenna near a south-facing window to
receive the best signal.
For details, see "Listening to XM Satellite Radio Programs" (vpage
45, 46).
When making connections, also refer to the operating instructions of
the XM Mini-Tuner and Home Dock.
XM Mini-Tuner and Home Dock
XM
NOTE
Keep the power cord unplugged until the XM Mini-Tuner and Home
Dock connection have been completed.
• The XM name and related logo are registered trademarks of XM
Satellite Radio Inc. All rights reserved.
• XM Ready is a registered trademark of XM Satellite Radio Inc. All
rights reserved.

Antenna terminals

®
An F-type FM antenna cable plug can be connected directly.
Direction of broadcasting station
FM antenna
75 Ω/ohms
Coaxial cable
FM indoor antenna
(supplied)
AM loop antenna assembly
Remove the vinyl tie and take
out the connection line.
a. With the antenna on top of
any stable surface.
Mount
AM loop antenna
(supplied)
AM outdoor antenna
Ground
Connect to the AM
antenna terminals.
• Do not connect two FM antennas simultaneously.
• Even if an external AM antenna is used, do not
Bend in the reverse direction.
• Make sure the AM loop antenna lead terminals do not
b. With the antenna attached
to a wall.
Installation hole Mount on wall, etc.
Connection of AM antennas
1. Push the
2. Insert the
3. Return the
lever.
conductor.
lever.
NOTE
disconnect the AM loop antenna.
touch metal parts of the panel.
Note to CATV system installer:
This reminder is provided to call the CATV system
installer's attention to Article 820-40 of the NEC
which provides guidelines for proper grounding and,
in particular, specifies that the cable ground shall be
connected to the grounding system of the building,
as close to the point of cable entry as practical.


Advertisement

Table of Contents
loading

This manual is also suitable for:

Avr-2808ci

Table of Contents