Playback; Preparations; Turning The Power On; Selecting The Input Source - Denon AVR-2808 Owner's Manual

SOURCE SELECT
<SOURCE> <TUNING PRESET> MASTER VOLUME
<ON/STANDBY> <PHONES> SPEAKER
<POWER>
[ AMP]
SPEAKER
[POWER ON]
[POWER OFF]
MASTER
VOLUME
[MUTE]
[TUNER]
SOURCE
SELECT
About the button names in these explanations
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit


Playback

Preparations

Turning the Power On

1
<POWER>
Press .
The power indicator lights red and the power is set to the standby
mode.
2
<ON/STANDBY>
Press
The power indicator flashes green and the power turns on.
To operate the AVR-2808CI using the main remote control unit, set the
remote control unit to the AMP mode
[ TU]
Unit Operations").
( mode)
Turning the Power Off
[A ~ G]
q Press <ON/STANDBY> or [POWER OFF].
[d f]
The power is set to the standby mode.
[MEMO]
w Press <POWER>.
The power indicator turns off, and so does the power.
[MODE]
[BAND]
NOTE
Power continues to be supplied to some of the circuitry even when
the power is in the standby mode. When leaving home for long periods
[CHANNEL]
of time or when traveling, either press <POWER> to turn off the power,
or unplug the power cord from the power outlet.
[1 ~ 8]

Selecting the input source

[SHIFT]
Operation on the main unit
<SOURCE SELECT>
Turn
If "Rec Select" or "Video Select" is selected for the input source,
press <SOURCE> before turning <SOURCE SELECT>.
Operation on the main remote control unit
Press
The desired input source can be selected directly.
To operate the AVR-2808CI using the main remote control unit, set the
remote control unit to the AMP mode
Unit

Operations During Playback

Adjusting the Master Volume
[POWER ON].
or
Either turn
VOLUME]
Turning Off the Sound Temporarily (Muting)
(vpage 51 "Remote Control
Press
To cancel, press [MUTE] again. Muting can also be canceled by adjusting
the master volume.
Listening with Headphones
Plug the headphones into
The sound from the speakers and pre-out connectors is automatically
cut.
NOTE
Be careful not to set the volume too high when using headphones.
Switching the front speakers
Press
.
[SOURCE SELECT]
.
(vpage 51 "Remote Control
Operations").
<MASTER VOLUME>
or press
.
[MUTE]
.
<PHONES>
.
SPEAKER
.
Front A Front B
Front A+B
[MASTER