Playing A Usb Memory Device; Playable Usb Memory Formats; Playing Files Stored On Usb Memory Devices - Marantz SA-11S3 Owner's Manual

Playing a USB memory device

Playable USB memory formats

Files created in the following formats and stored on a USB
memory device can be played.
n USB-Compatible file systems
FAT16 or FAT32
• If the USB memory device is divided into multiple
partitions, only the top drive can be selected.
n Maximum number of playable files and folders
This depends on the specification of the USB memory
device (FAT16 or FAT32).
n File format
MP3 (MPEG-1 Audio Layer-3)
WMA (Windows Media Audio)
AAC (Advanced Audio Codec)
WAV (Linear PCM)
n Tag data
ID3-TAG (Ver.1.x and 2.x)
WMA-TAG
AAC-TAG
The title, artist, and album tag data are supported.
Playable MP3/WMA file
Sampling
File format Bit rate
frequency
MPEG-1 Audio
Layer-3, 32/40/48/56
32, 44.1,
MP3
/64/80/96/112/128/1
48 kHz
60/192/224/256/
320 kbps
CBR: 48 – 320
VBR: Peak 384
32, 44.1,
WMA
(display corresponds
48 kHz
to average bit rate
value)
32, 44.1,
AAC
8 – 320 kbps
48 kHz
Linear
PCM: PCM
LINEAR
32/44.1/48
Linear PCM: 16 bit
PCM Those other
than the above,
not supported.
• Only music files that are not copyright-protected can be
played on this set.
• Contents downloaded from pay sites on the Internet are
copyright protected. Also, files encoded in WMA format
when ripped from a CD, etc., on a computer may be copyright
protected, depending on the computer's settings.

Playing files stored on USB memory devices

1
Press DISC/INPUT to change the
Extension
input source to "USB".
2
Connect the USB memory device
to the USB terminal on the front
.mp3
panel of this unit. ( v page 10)
3
Press ui to select a file/folder
you want to play back and press
.wma
ENTER , p or 1 .
4
Press ui to select a file and
press ENTER , p or 1 .
.m4a
Playback starts.
.wav
ENGLISH
18