Related Manuals for Vents Wave
Summarization of Contents
Delivery Set
Delivery Set Contents
Lists fan, screws, dowels, manual, packing box, and gasket.
Brief Description
Axial Fan Purpose
Describes the fan's use for ventilation and its features.
Operation Guidelines
Operating Parameters
Covers power, ingress protection, temperature, and electrical rating.
Temperature Operation Warning
Warns against operating the fan outside the specified temperature range.
Designation Key
Model Designation Breakdown
Explains the coding system for fan models, including series and options.
Fan Series Options
Lists available fan series like Solid, Wave, Flip, and their variations.
Outlet Duct Diameter
Specifies the available outlet duct diameters for the fans.
Mounting
Mounting Options and Ducting
Describes wall and ceiling mounting, direct exhaust, and duct system installation.
Condensate Management
Details condensate prevention, insulation, and drain requirements.
Pre-installation Checks and Procedure
Advises checking for damage, marking holes, and installing the fan.
Fastener Requirements and Warnings
Specifies fasteners and warns against operation without a non-return valve.
Terminal Designations
Wiring Terminal Codes
Defines terminal designations like L, N, S, S1, and QF for wiring diagrams.
Power Cable Installation Warning
Correct Power Cable Routing
Warns against manually drilled holes for power cables, voiding warranty.
Installation Zones
Bathroom Installation Zones
Specifies where models can be installed in bathrooms based on IEC standards.
Maintenance
Cleaning Instructions
Details how to clean the unit using a soft cloth and mild detergent.
Troubleshooting
Fan Not Rotating/Responding
Provides troubleshooting steps for power supply and connection issues.
Low Air Flow Issues
Offers solutions for low airflow, mainly related to ventilation system or impeller clogs.
Noise and Vibration Problems
Addresses increased noise and vibration, suggesting checks for mounting and system clogs.
Storage and Transportation Regulations
Storage Conditions
Specifies requirements for dry, ventilated premises and temperature range.
Handling and Storage Precautions
Advises using suitable machinery and avoiding aggressive vapors.
Transportation Guidelines
Covers packaging, transport modes, and handling during loading/unloading.
Post-Transportation Warm-up
Recommends warming up the unit after low-temperature transport.
Manufacturer's Warranty
Product Compliance
Declares compliance with EU low voltage and EMC directives.
Warranty Period and Coverage
States the 60-month warranty and entitlement to free repair for manufacturer faults.
Warranty Exclusions
Lists items not covered by warranty, like maintenance, installation, and setup.
Warranty Claim Requirements
Details what the user must provide for warranty service.
Warranty Non-Applicable Cases
Lists situations where the manufacturer's warranty does not apply.
Extended Warranty Exclusions
Lists further exclusions like redesign, misuse, voltage surges, and third-party actions.
Warranty Claim Review Process
States claims are reviewed upon presentation of unit, documents, and manual.
Ensuring Trouble-Free Operation
Emphasizes following regulations for long and trouble-free operation.
Dimensions
100 Solid (One) (Glass) Dimensions
Provides dimensions A, B, L, L1 for the 100 Solid (One) (Glass) model.
100 Wave (One) Dimensions
Provides dimensions A, B, L, L1 for the 100 Wave (One) model.
100 Flip (One) Dimensions
Provides dimensions A, B, L, L1 for the 100 Flip (One) model.
125 Solid (Glass) Dimensions
Provides dimensions A, B, L, L1 for the 125 Solid (Glass) model.
Mounting Diagrams
Duct Installation and Condensate
Illustrates duct installation, slope for condensate, and grille/hood.
Ceiling Mounting and Condensate Drain
Shows ceiling mounting, upward discharge, and condensate drain illustration.
Installation Procedures
Electrical Wiring and Switch Control
Illustrates wiring connections (QF, L, N) and switch operation (ON/OFF).
Wall Mounting Steps
Details the sequential steps for mounting the fan on a wall.
Wiring and Operation Logic
Model-Specific Wiring Diagrams
Provides detailed wiring diagrams for different fan model configurations.
Fan Operational Logic
Explains the fan's behavior based on switch states and delay timer.
Maintenance and Final Checks
Cleaning Procedure
Shows how to clean the fan unit using water and a cloth.
Final Installation and Switch Check
Depicts final installation steps and checking the switch status.
Need help?
Do you have a question about the Wave and is the answer not in the manual?
Questions and answers