Related Manuals for Kistler 6044 Series
Summarization of Contents
Instruction Manual
Uncooled Piezoelectric Pressure Sensors
Overview of uncooled piezoelectric pressure sensors.
Sensor Types
Lists the specific sensor models covered in this manual.
Introduction
Disposal Instructions for Electronic Equipment
Environmental guidelines for the proper disposal of electronic devices at the end of their life cycle.
Software Upgrades and Updates
Information regarding the importance and necessity of installing software upgrades for embedded systems.
Preface
Technical Data and Documentation
Guidance on accessing technical specifications, datasheets, and other relevant documentation.
Principle of Operation
Explains the fundamental piezoelectric principle used by the sensors to measure pressure.
Installation of the Piezoelectric Sensor
General Installation Information
Discusses factors affecting accuracy, bore machining, and sealing technologies for sensor installation.
Direct Installation
Details the process of installing the sensor directly into the engine head without a sleeve.
Installation with Sleeve
Describes the method of using a mounting sleeve for proper sealing and installation.
Installation Examples
Illustrates various sensor mounting configurations and techniques with visual aids.
Machining the Mounting Bore
Specifies the critical requirements for machining the mounting bore to ensure a correct seal.
Checkpoints Before Installation
Outlines essential pre-installation checks for the sensor, cable, and mounting bore.
Flameguard for M5 Sensors
Instructions for the correct installation and removal of the flameguard accessory for M5 sensors.
Setting Up the Measuring Chain
Connecting to Charge Amplifier
Details on how to properly connect the piezoelectric sensor cable to the charge amplifier.
Selecting Sensor Sensitivity
Advice on choosing the optimal sensitivity setting based on operating conditions and temperature.
Dismounting and Maintenance
Dismounting Procedure
Step-by-step instructions for detaching the sensor from the mounting bore.
Maintenance Guidelines
Recommendations for visual inspection, cleaning, and insulation checks for sensor upkeep.
Need help?
Do you have a question about the 6044 Series and is the answer not in the manual?
Questions and answers