Related Manuals for Kistler 6125 Series
Summarization of Contents
Introduction
Disposal instructions for electronic equipment
Guidelines for proper disposal of electronic waste.
Software upgrades and updates
Importance of installing software upgrades for product performance.
Preface
Technical data and documentation
Information on where to find data sheets and product documentation.
Principle of operation
Explains the piezoelectric principle and sensor operation.
Installation of the piezoelectric sensor
General information on sensor installation
Importance of careful installation, bore machining, and torque.
Direct installation
Details requirements and procedures for direct sensor installation.
Installation with sleeve
Explains when a mounting sleeve is necessary and its benefits.
Installation examples
Illustrates different sensor installation methods.
Machining the mounting bore
Details on concentricity, flatness, and heat transfer for bore machining.
Check points before installation
Key checks for cable, seal ring, and mounting bore before installation.
Flameguard for M5 sensors
Instructions for installing and removing the flameguard.
Setting up the measuring chain
Connecting the piezoelectric cable to charge amplifier
How to connect the sensor cable to the charge amplifier.
Selecting the sensor sensitivity
Guidance on selecting sensor sensitivity based on temperature.
Dismounting and maintenance
Dismounting
Step-by-step instructions for removing the sensor.
Maintenance
Procedures for sensor cleaning, inspection, and insulation checks.
Need help?
Do you have a question about the 6125 Series and is the answer not in the manual?
Questions and answers