KERN DS Series Operating Instructions Manual

KERN DS Series Operating Instructions Manual

Electronic precision and platform balances

Advertisement

GB

Table of contents

:
1
MODE - MENUE __________________________________________________________ 26
2
Technical data _____________________________________________________________ 27
2.1
KERN 572 __________________________________________________________________ 27
2.2
KERN 573 __________________________________________________________________ 28
2.3
KERN KB __________________________________________________________________ 29
2.4
KERN FKB _________________________________________________________________ 29
2.5
KERN DS ___________________________________________________________________ 30
3
Fundamental information (general) ___________________________________________ 31
3.1
Intended use_________________________________________________________________ 31
3.2
Inappropriate use ____________________________________________________________ 31
3.3
Guarantee __________________________________________________________________ 31
3.4
Monitoring the test substances__________________________________________________ 31
4
Fundamental safety information ______________________________________________ 32
4.1
4.2
Staff training ________________________________________________________________ 32
5
Transport and storage _______________________________________________________ 32
5.1
Acceptance check ____________________________________________________________ 32
5.2
Packaging___________________________________________________________________ 32
6
Unpacking, installation and commissioning _____________________________________ 32
6.1
Place of installation, place of use ________________________________________________ 32
6.2
Unpacking __________________________________________________________________ 33
6.2.1
Installation _______________________________________________________________________ 33
6.3
Mains supply ________________________________________________________________ 33
6.4
Connecting peripheral equipment _______________________________________________ 33
6.5
Initial start-up _______________________________________________________________ 33
6.6
Adjustment _________________________________________________________________ 33
6.7
Adjusting ___________________________________________________________________ 33
6.7.1
Adjusting for verification (KERN 573) _________________________________________________ 34
6.8
Verification _________________________________________________________________ 34
24
KERN 572/573/KB/DS/FKB
Version 5.1 05/2006
Operating Instructions
Electronic Precision and Platform Balances
572/573/KB/DS/FKB-BA-defsi-0651

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DS Series and is the answer not in the manual?

Questions and answers

Summarization of Contents

Technical data
KERN 572
Technical specifications and data for the KERN 572 series of balances.
KERN 573
Technical specifications and data for the KERN 573 series of balances.
KERN KB
Technical specifications and data for the KERN KB series of balances.
KERN FKB
Technical specifications and data for the KERN FKB series of balances.
KERN DS
Technical specifications and data for the KERN DS series of balances.
Fundamental information (general)
Intended use
Defines the purpose and correct application of the balance.
Inappropriate use
Outlines incorrect usage scenarios that can damage the balance or yield faulty results.
Guarantee
Details conditions under which the product guarantee is invalidated.
Monitoring the test substances
Information on checking metrology features and adjusting weights for quality assurance.
Fundamental safety information
Observe the information in the operating instructions
Emphasizes the importance of reading and following operating instructions.
Staff training
Specifies that only trained personnel should operate the device.
Transport and storage
Acceptance check
Procedure for checking the device for damage upon delivery.
Packaging
Instructions for retaining original packaging for potential returns.
Unpacking, installation and commissioning
Place of installation, place of use
Guidance on selecting the optimal location for balance installation.
Unpacking
Steps for safely removing the balance from its packaging.
Installation
Instructions for correctly installing the balance for operation.
Mains supply
Information on connecting the balance to the power supply.
Connecting peripheral equipment
Guidelines for connecting external devices like printers or PCs.
Initial start-up
Procedure for the first power-on and warm-up of the balance.
Adjustment
Explanation of why and how to adjust the balance for accuracy.
Adjusting
Detailed steps for performing the balance adjustment.
Adjusting for verification (KERN 573)
Specific adjustment procedure for KERN 573 models prior to verification.
Verification
Information on official verification requirements and procedures.
Operation
Display control panel
Overview of the balance's display and control panel elements.
Weighing with Tare
Procedure for weighing items while excluding container weight.
COUNT - Selection reference piece
How to use the counting function by selecting a reference piece.
PERCENT %
Using the balance for percentage weighing calculations.
FORMULA WEIGHING
Operation for weighing multiple components for a formula.
TOLERANCE WEIGHING
Using the balance for tolerance checking against a target value.
ADJUST
Procedure for adjusting the balance during operation.
PRESELECT TARE
Setting a tare value in advance for specific weighing containers.
AUTO TARE active
Description of the automatic tare function for stabilizing the zero point.
FILTER / SPEED
Adjusting the balance's filter and speed settings for different environments.
AUTO OFF active
Information on the automatic shut-off function to save power.
VARIABLE FACTOR
Using a variable factor to automatically multiply weighing results.
PRESELECT UNIT
Setting preferred units for quick selection during weighing.
Interface RS 232 C
Technical data and description of the RS 232 serial interface.
RS 232 C Data output via interface RS 232 C
Details on how to output data from the balance via the RS 232 interface.
There are 4 methods for the data output via RS 232 C
Explains the different methods available for data output via RS 232.
Description of the data transfer
Structure and format of data transferred via the RS 232 interface.
Numerator
Information on the numerator function for data output.
Printer
Instructions for connecting and using a printer with the balance.
Underfloor weighing
Procedure for performing weighing using the underfloor hook.
Maintenance, upkeep, disposal
Cleaning
Instructions for cleaning the balance safely and effectively.
Maintenance, upkeep
Guidelines for the general maintenance and upkeep of the balance.
Disposal
Information on the proper disposal of the balance according to regulations.

Table of Contents