Advertisement
2. Tighten ring gear bolts to specified torque.
Slide lockplate into groove of bolts, squeeze
front end with a pliers (to firmly unite lock-
plate with bolts) and lock by bending lockplate
down over side of bolt head.
3. Coat differential pinions with MoS2 paste.
4. Install large differential pinions with press-fit
threaded plates through large opening in differ-
ential housing and locate with joint flanges.
6. Knock in differential pins in correct position
and lock with spiral pin.
7. Knock on tapered roller bearing inner races
with P 264.
5. Install small differential pinions between large
differential pinions and turn, until bores of pin-
ions align with bores in housing.
Printed in Germany -IV.
1981
Disassembling and Assembling Differential
39-8e
Advertisement
