Advertisement
30
Clutch, Control
Installing
1. After cleaning. check clutch contact surface
of flywheel for wear. If necessary, machine
surface and smooth with emery cloth. Replace
the flywheel, if necessary.
2. Lubricate needle bearing in flywheel with
about 1 cm3 (1,5 grams) of MoS2 grease.
3. Install clutch with special tool 9102 to
center in flywheel.
4. Center clutch pressure plate on flywheel.
5. Tighten bolts evenly and diagonally to prevent
distortion on cover. Tighten bolts to speci-
fied torque. Use Special Tool P 201 a and a
spacing sleeve to hold the flywheel.
30 -6
Printed in Germany
Removing and Installing Clutch Pressure Plate and Disc
Advertisement
