Related Manuals for ChargePoint CP6021X-80A-L7
Summarization of Contents
Ordering Information
Hardware
Lists available hardware components and their order codes for the CP6000 series.
Software and Services
Details the order codes for various software and service plans offered for the CP6000 stations.
Architectural Drawings and Dimensions
Pedestal Mount
Provides detailed dimensions and visual representations for pedestal-mounted CP6000 charging stations.
Wall Mount
Shows dimensions and illustrations for CP6000 charging stations designed for wall mounting.
General Specifications
Electrical Input
Outlines the electrical input specifications, including voltage, current, and panel breaker requirements for the CP6000.
Electrical Output
Details the electrical output capabilities, such as power (kW) for single and dual port configurations.
Mounting and Functional Interfaces
Describes physical mounting options and key functional interfaces like connectors and authentication methods.
Safety and Connectivity Features
Lists safety features like ground fault detection and connectivity aspects like authentication protocols.
Safety and Operational Ratings
Covers environmental operating conditions, enclosure ratings, and EMC compliance for the CP6000 station.
IMPORTANT SAFETY INSTRUCTIONS
General Warnings
Provides critical safety warnings and instructions to follow before servicing, installing, or operating the charging station.
1 Introduction
Accessing Complete Documentation
Guides users on how to access essential documents like datasheets and installation guides from ChargePoint.
Bring These Tools and Materials
Lists the necessary tools and materials required for the installation of CP6000 charging stations.
Inspect the Boxes for Contents
Instructs users to verify all components are present before commencing installation work.
2 Install a Pedestal Mount
Prepare the Pedestal for Mounting
Details the initial steps for preparing the pedestal, including loosening screws and removing covers.
Mount the Pedestal
Covers the process of physically mounting the pedestal onto the prepared concrete base.
Install the Housing
Explains how to attach and secure the main enclosure (housing) to the pedestal.
Install the CMK
Guides the installation of the Cable Management Kit (CMK) onto the pedestal mount.
3 Install a Wall Mount
Mount the Brackets
Describes how to install the wall mounting brackets, ensuring correct placement and leveling.
Mount the CMK
Details the procedure for installing the Cable Management Kit (CMK) for wall-mounted stations.
Prepare the Housing
Details the steps for preparing the station's housing before installation.
Install the Housing
Covers the steps for attaching and securing the main enclosure (housing) to the wall mount brackets.
Install the Conduit
Explains how to feed and secure the conduit for wiring into the wall-mounted station.
4 Connect Wiring - North America
Grounding Requirements
Outlines the essential grounding procedures and requirements for safe electrical connections.
Install Circuit Sharing Jumpers
Details the installation process for circuit sharing jumpers, critical for dual-port configurations.
Install the Power Plate
Guides the installation of the power plate within the station housing.
Connect the Wiring
Provides step-by-step instructions for stripping wires and making electrical connections to the terminal block.
Check Voltages
Explains how to verify input voltages using a voltmeter to ensure correct electrical connections.
5 Assemble the Station
Connect the Head Assembly
Guides the process of connecting the main head assembly to the station's main body.
Install Cable Clamps
Details the procedure for installing cable clamps to manage and secure the charging cables.
6 Complete Station Setup
Power Up
Instructs on how to power up the charging station and check initial status lights.
Configure and Pinpoint the Station
Explains the steps for configuring the station using the installer app or portal and pinpointing its location.
Start a Charging Session
Describes how to perform a test charging session to verify proper installation and functionality.
Questions?
Provides contact information for technical support and troubleshooting.
1 Site Design Guidelines
Initial Site Guidelines
Provides foundational advice for designing a charging site, considering future needs and electrical infrastructure.
Electrical Requirements
Lists the minimum electrical requirements for installing each CP6000 charging station.
Charging Station Placement
Offers guidance on selecting optimal locations for charging stations to minimize costs and optimize runs.
Layout Considerations
Discusses factors for planning the layout, including parking arrangements and accessibility.
Plan for the Future
Advises on planning for future EV charging needs and potential upgrades.
2 Civil and Mechanical Design
Component Dimensions and Weights
Provides dimensions and approximate weights for different configurations of the CP6000 station.
Pedestal Mount With CMK
Shows dimensional drawings and illustrations for pedestal-mounted stations with the Cable Management Kit.
Wall Mount With CMK
Displays dimensional drawings and illustrations for wall-mounted stations with the Cable Management Kit.
Mounting Specifications - Pedestal Mount Stations
Details the requirements for concrete pads and anchors for pedestal installations.
Pedestal Base Designs
Illustrates different designs for pedestal bases, considering parking arrangements and clearances.
Pedestal Configuations for Different Parking Arrangements
Shows various ways to configure pedestal bases for different parking lot layouts.
Mounting Specifications - Wall Mount Stations
Lists requirements for wall mounting, including wall stability, height, and clearances.
Drainage
Emphasizes preventing water accumulation around the installation site to avoid hazards.
Clearances
Specifies minimum clearance requirements for pedestal installations relative to obstructions.
Accessibility
Covers compliance with accessibility laws for station placement and display height.
Signage
Recommends signage requirements based on local codes for parking spaces and EV charging.
3 Electrical Design
General Wiring Considerations
Discusses general principles for ensuring proper service wiring and conduit installation.
Wall Mount Considerations
Specific wiring considerations for stations mounted on walls, including conduit entry.
Pedestal Mount Considerations
Wiring considerations for pedestal-mounted stations, focusing on underground service entry.
Conduit
Specifies conduit size requirements and stub-up dimensions for pedestal installations.
Electrical Supply Requirements
Details wiring sizing, circuit breaker selection, and voltage requirements for the CP6000.
Grounding Requirements
Reinforces the importance of proper grounding and bonding for the charging station.
Connect To These Systems
Illustrates valid electrical system configurations for connecting the CP6000.
Do Not Connect to These Systems
Shows electrical system configurations that are not compatible with the CP6000.
4 Connectivity
Signal Strength and Quality
Explains how to test and ensure adequate cellular signal strength for station activation and operation.
Repeaters
Discusses the need for and selection criteria for cellular signal repeaters.
5 Pedestal Mount Concrete Preparation
Concrete Mounting Template
Describes the use of the concrete mounting template for new or existing concrete installations.
Tools and Materials
Lists specific tools and consumable materials required for concrete preparation.
Installation into New Concrete
Provides detailed steps for preparing the concrete pad for new installations.
Installing on Existing Concrete
Outlines the process and requirements for installing on pre-existing concrete surfaces.
Need help?
Do you have a question about the CP6021X-80A-L7 and is the answer not in the manual?
Questions and answers