Cast Iron Stove And Direct-Vent Burner System Assembly - Comfort Glow CDVBN(A), CDVBP(A) Owner's Operation And Installation Manual

PRE-INSTALLATION
PREPARATION
Continued
4"
Figure 4 - Clearance for Corner Installation
25"
Front
5
25 / "
8
Figure 5 - Stove with Burner System
Bottom Dimensions
105501
CAST IRON STOVE
AND DIRECT-VENT
BURNER SYSTEM
ASSEMBLY
STOVE BODY ASSEMBLY
1. Lift off corrugated box enclosing stove
body crating.
2. Remove all screws fastening the wood
frame enclosure. Spread wood frame open
4"
and lift away from plastic-bagged stove
body. The bottom pieces of pallet wood
will remain bolted to the stove body.
3. Remove plastic bag from stove body.
4. Remove back panel from stove (see
Figure 6). Use an adjustable wrench or
a 10 mm socket. Remove six (6) bolts
and washers. Keep bolts and washers
to reattach back panel later.
5. Remove all contents from inside stove
cavity. Contents include:
(1) - Stove bottom
(4) - Legs with leg leveler bolts
(1) - Bottom door
(1) - Top grate
(1) - Hardware kit bag with fasteners
Bolt
Back
Stove
Panel
Figure 6 - Removing Back Panel
Front of
Stove
Unit
Drop
Cloth/
Blanket
Figure 7 - Laying Stove On Side
OWNER'S MANUAL
Product
Identification
Label
Top of Stove Unit
Pallet
Wood
Bolted to
Bottom of
Stove
Body
5
6. Carefully lay stove body on back to attach
bottom components to stove body (see
Figure 7). Rest stove on drop cloth or blan-
ket to avoid scratching stove edges.
7. Remove remaining pallet wood at-
tached to bottom of stove body (see
Figure 8). Use an adjustable wrench to
remove bolts.
Bolt
Front
Pallet Wood
Figure 8 - Removing Pallet Wood from the
Bottom of the Stove
Door Catch Bolt
With Adjustable
Door Hinge Step
Hex Nuts Hole
Bolt Hole
Leg
Front
Hole
Stove
Bottom
Hole
Leg Hole
Bottom Of
Stove Unit
Figure 9 - Locating Threaded Holes for
Stove Bottom, Legs, and Door Attachment
Front of
Stove Unit
Pallet
Wood
Bottom Of
Stove Unit
Leg
Hole
Top of
Stove
Unit
Continued