Victorinox SWISS AIR FORCE Manual page 19

• Turn the crown to pre-position the hands on the desired time.
• Push the crown back down firmly against the case in position 1,
the watch will begin to run again instantly.
NOTE: For precise time setting, it is advisable to pass the desired minute,
then turn the crown counterclockwise to position the minute hand on the
relevant mark.
SETTING THE DAY/DATE
• First turn the crown (in position 1) away from you approximately ten
times to activate the automatic movement. The sweep second hand will
be moving.
• Pull the crown out into position 3 (completely out). Set the correct time
by moving the hands clockwise. When you reach 12 PM, the calendar
date will jump and then set the correct time. Push the crown back to
position 1.
• Set the crown in position 2 (intermediate position). Adjust the date by
turning the crown away from you. Turn the crown toward you to adjust
the day setting (select the appropriate language). Then set the crown
back to position 1 and your watch is adjusted.
- 17 -