Salda RIS 1200PW EKO 3.0 Technical Manual
Ahu with heat recovery
Source: salda.lt/en, vetter-lufttechnik.de
Advertisement
Quick Links
Библиотека СОК
REKUPERATORINIAI ĮRENGINIAI
ВЕНТИЛЯЦИОННЫЕ АГРЕГАТЫ С РЕКУПЕРАЦИЕЙ ТЕПЛА
AHU WITH HEAT RECOVERY
LÜFTUNGSGERÄTE MIT WÄRMERÜCKGEWINNUNG
Techninis vadovas
Техническое руководство
Technical manual
Bedienungsanleitung
Įmonė pasilieka teisę keisti techninius duomenis
Subject to technical modification
RIS 1200PE/PW EKO 3.0
[ lt ]
[ ru ]
[ en ]
[ de ]
Änderungen in Konstruktion und Design sind vorbehalten
Производитель оставляет за собой право усовершенствования технических данных
Advertisement
Related Manuals for Salda RIS 1200PW EKO 3.0
Summarization of Contents
Product Description and Safety
Product Description
General overview of the ventilation unit and its purpose.
Safety Precautions
Essential safety measures for handling and operating the unit.
Operating Conditions
Specifies the environmental and operational limits for the unit.
Unit Components
Lists and identifies the main parts of the ventilation unit.
Unit Maintenance
Filter Maintenance
Procedures for cleaning or replacing air filters for optimal performance.
Fan Maintenance
Procedures for inspecting and cleaning the unit's fans.
Heat Exchanger Maintenance
Heat Exchanger Cleaning Procedure
Steps for cleaning the heat exchanger to ensure efficient heat recovery.
Warranty and Heater Information
Product Warranty Details
Details the warranty period, terms, and conditions for the unit.
Electrical Heater Operation and Safety
Information on the electrical heater, including protections and maintenance.
Technical Specifications
Heater Performance Data
Electrical and performance data for the heater component.
Fan Performance Data
Performance data for the supply and extract fans.
General Unit Technical Data
Overall technical data including power, efficiency, weight, and dimensions.
Filter Specifications
Exhaust and Supply Filter Details
Details filter types, classes, and their physical dimensions.
Unit Dimensions and Layout
Overall Unit Dimensions and Layout
Visual representation of the unit's overall dimensions and layout.
Unit Mounting Instructions
Installation Requirements and Safety
Emphasizes that installation must be done by qualified personnel.
Mounting Surface and Air Duct Connections
Proper connection procedures for air ducts and flanges.
Vibration and Noise Isolation
Recommendations for minimizing noise and vibration transmission.
Draining System v1 and Sensors
Draining System v1 Configuration
Details the setup and requirements for the first type of drainage system.
Sensor Installation Guidelines
Installation guidelines for air temperature and quality sensors.
Condensate Drainage System v2
Draining System v2 Installation
Instructions for installing the second type of drainage system.
Siphon and Temperature Requirements
Proper use of siphon and temperature considerations for condensate removal.
Unit Component Diagram
Component Identification and Function
Lists and explains the function of each major component in the unit.
Airflow Path and Component Layout
Diagram showing airflow path and component arrangement.
Optional Accessories
Valves, Actuators, and Dampers
Accessories like valves, actuators, and dampers.
Control and Monitoring Accessories
Remote controllers, sensors, and other control accessories.
Ancillary Equipment and Silencers
Other accessories like silencers, filters, and pumps.
AVA/AVS Connection Options
Connecting AVA/AVS Systems
How to connect AVA/AVS systems to the unit.
Automatic Control Logic
Temperature and Airflow Regulation
Explains how the unit's automatic control system regulates temperature and airflow.
System Protection Features
Water Heater Protection Measures
Safety measures for the water heater against freezing and overheating.
Electrical Heater Overheat Protection
Details the dual-level thermal protection for the electrical heater.
System Operation and Control
Fan Speed and Ventilation Modes
How fan speeds are controlled and different ventilation modes function.
CO2 Sensor Integration
Information on connecting and using a CO2 sensor for air quality control.
BMS Network Integration
BMS Network Connection Procedure
How to connect the unit to a Building Management System.
ModBus Communication Settings
Details ModBus type, port, and address configurations.
ModBus Addressing and Configuration
ModBus Register Definitions
Table listing ModBus addresses, functions, and values.
DIP Switch Configuration
Explains the function of DIP switches for system settings.
Electrical Connections and Terminals
HVAC Unit Electrical Connection
General requirements and safety for connecting the unit to mains power.
Input/Output Terminal Definitions
Detailed list of terminal connections and their functions.
System Adjustment Guidelines
Remote Control Operation
How to use the remote control for fan speed and temperature settings.
Heater Connection Diagrams
Wiring diagrams for connecting electrical and water heaters.
Sensor Installation and Antifreeze Protection
Sensor Installation Guidelines
Proper installation of air temperature and quality sensors.
Antifreeze Protection for Water Heater
Ensuring proper installation of antifreeze protection for the water heater.
Troubleshooting Common Issues
Unit Not Operating Diagnosis
Steps to take if the ventilation unit is not functioning.
Electrical Connection Faults
How to diagnose and fix issues related to electrical connections.
Troubleshooting Common Issues
Electrical Heater and Fan Faults
Diagnosing and resolving issues with the electrical heater and fans.
Controller, Cable, and Sensor Faults
Troubleshooting problems with the RG1 controller, cables, and connections.
Troubleshooting Common Issues
Detailed Sensor Fault Diagnosis
In-depth troubleshooting for sensor failures with resistance charts.
Control Board RG1 Layout
Control Board Component Identification
Diagram showing the layout and labeling of components on the RG1 control board.
Controller LED Indicators
LED Status Indicator Meanings
Explanation of the meaning of different LED lights on the controller.
System Component Labeling
Terminal Assignments and Parameters
Table detailing controller terminals, components, I/O types, and parameters.
System Component Labeling
Terminal Assignments and Control Signals
Detailed list of terminal assignments and control signal types.
System Component Labeling
Fan and Sensor Signal Inputs
Specifications for fan signal inputs and various sensor connections.
Regular System Check-up
Switching Device Inspection
Visual inspection of the contactor and switching device for proper operation.
Electrical Connection Diagrams
RIS 1200PE 3.0 EKO 3.0 Wiring Diagram
Detailed electrical wiring diagram for the RIS 1200PE 3.0 EKO 3.0 model.
Electrical Connection Diagrams
RIS 1200PE 6.0 EKO 3.0 Wiring Diagram
Detailed electrical wiring diagram for the RIS 1200PE 6.0 EKO 3.0 model.
Electrical Connection Diagrams
RIS 1200PE 9.0 EKO 3.0 Wiring Diagram
Detailed electrical wiring diagram for the RIS 1200PE 9.0 EKO 3.0 model.
Electrical Connection Diagrams
RIS 1200PW EKO 3.0 Wiring Diagram
Detailed electrical wiring diagram for the RIS 1200PW EKO 3.0 model.
Product Maintenance Table
Maintenance Log and Schedule
Table for recording maintenance activities, dates, and intervals.
Need help?
Do you have a question about the RIS 1200PW EKO 3.0 and is the answer not in the manual?
Questions and answers