Advertisement

Quick Links

Safety Instructions and Attentions
First of all, as the most basic principle: This product is a professional lighting
set equipment and should be used by professional lighting engineers or under
the guidance of professionals. Basic safety attentions must always be followed
during use, as follows:
1.Before use, please read and understand these instructions and attentions.
2.Professional lighting is prohibited for children. When children are near, parents or
accompanying persons must supervise closely to prevent children from personal injury
due to collision with lamps or private use of lamps.
3.This lighting product is not ordinary lighting product and cannot be used for general
lighting. Anyone who has suffered eye damage or has sensitive eyes should avoid
using this product.
4.When the lamp is on, it must be used with care. Do not touch high-temperature parts,
such as LED lamp beads, to avoid burns.
5.When the lamp is on, it is forbidden to look directly at the lamp beads under any
circumstances. Strong light should be used under the guidance of professional lighting
engineers. Avoid prolonged exposure to strong light under any circumstances. If eye
discomfort, please turn off the lamp in time, suspend use, and see a doctor immediate-
ly.
6.If the lamp bead is damaged or deformed by heat, stop using this equipment, and
contact the manufacturer, service agent or qualified maintenance personnel to replace
the lamp bead in time to avoid accidents.
7.This product is only suitable for use in -10℃ to 40℃ operating environment and
normal humidity environment.
8.Do not use damaged equipment or accessories, and wait for professional maintenance
personnel to check and repair to confirm being normal before use.
9.During using, if the casing of this product is broken due to being dropped, squeezed or
subjected to strong impact, please do not use it, so as to avoid electric shock injury due
to contact with internal electronic components.
10.If an extension cord is required, please use an extension cord with a current rating
greater than or equal to that of the equipment. If an extension cord is rated less than
the equipment, overheating may result.
11.Some products have long power cords, please place the power cords properly and
keep them in a safe place. Avoid contacting the power cord with overheating surfaces,
avoid improper placement that could cause pulling damage, or trip on-site personnel.
Please use the certified power cord from the original manufacturer. If the product is
damaged by using a non-certified power cord, it will not be repaired by our factory.
12.Be sure to unplug equipment from the power outlet before cleaning and repairing.
When not in use, do not pull the power cord to unplug the equipment. For normal
power-off, please hold both ends of the plug of the equipment with your hands and
pull the plug out of power outlet. This equipment needs to be connected to a ground-
ed outlet.
23
13.This equipment is not waterproof, please keep it dry and do not immerse it in water or
other liquids. The equipment should be installed in a dry and ventilated place, and
avoid using it in rainy, humid, dusty or overheated environments. Do not place any
objects on the lamp or let liquid flow into the lamp to avoid accidents.
14.Do not disassemble the product without permission. If the product fails, it must be
checked and repaired by authorized maintenance personnel.
15.Before storing, make sure that the equipment has cooled down completely. For
storage, unplug the power cord from the equipment. The equipment should be placed
in the carrying case or in a ventilated dry place.
16.Do not place equipment near flammable and volatile solvents such as alcohol and
gasoline.
17.Do not use accessories that are not recommended by our factory to avoid fire, electric
shock or personal injury.
18.When cleaning, do not wipe it with a damp cloth, please use a dry cloth or a soft cloth
to wipe the dirt of the equipment.
19.Please take off the protective cover before using.
20.This product complies with ROHS,CE,KC,PSE and FCC certification, please refer to
the relevant national standards for use and operation.
21.The safety instructions are formulated according to the strict testing of the factory,
and the design and specifications of the equipment are subject to change without
prior notice. For latest product information, please check the GODOX website and
view latest electronic instruction.
22.Some products have built-in lithium batteries. Please use specified chargers, and use
them within a proper range of the specified voltage and temperature according to the
correct operating instructions.
23.Some products are battery powered. Do not use any batteries, power sources or
accessories not specified in the instructions for such products. Keep batteries and
other accessories out of the reach of children and infants. In the instance that a child
or infant swallows a battery or accessory, immediate emergency medical attention is
required. If the battery leaks, becomes discolored, deformed, emits smoke, or emits
an abnormal odor, remove it immediately. Be careful during removal to avoid burns.
Continued use could result in fire, electric shock, or burns. Do not use any deformed
or modified batteries. Do not disassemble or modify this product or battery. Do not
heat or solder the battery. Keep the battery away from fire or water. Do not incorrectly
insert the positive and negative ends of batteries, or mix old and new batteries or
batteries of different types together.
24.One-year warranty period, accessories such as consumable batteries, adapters,
power cords, etc. are not covered by this warranty.
25.If it is found that the equipment is repaired without authorization, the one-year
warranty period will be cancelled and relevant fees will be charged for maintenance.
26.Machine failures caused by non-standard operation are not covered by the warranty.
keep these instructions!
24

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Knowled M200Bi and is the answer not in the manual?

Questions and answers

Summarization of Contents

Product Introduction and Features
Foreword and Product Features
Introduces the product and highlights its key features, including superior performance and wide color temperature range.
General Safety Warnings
Lists critical warnings for safe operation, handling, and environmental considerations, such as keeping the product dry and away from children.
Product Identification and Components
Light Body and Controller Parts
Identifies and labels the main components of the light body and controller units using diagrams.
Remote Control Overview
Details the buttons and functions of the separately sold remote control for device operation.
Installation and Setup Guide
What's Included in the Box
Lists all items provided in the product packaging, including the light body, controller, and accessories.
Connecting Controller to Light Body
Step-by-step instructions for physically connecting the controller to the main light body unit.
Mounting the Light Body on a Tripod
Guidance on attaching the light body to a tripod for adjustable positioning and stable use.
Further Installation and Power
Mounting on Light Stand
Procedure for securing the controller onto a light stand for stable setup.
Lamp Cover and Reflector Installation
Instructions for attaching and detaching the protective lamp cover and standard reflector.
Connecting to DMX Controller
Explains the connection process for integrating the light with a DMX control system.
Controller Operation: Display and Basic Controls
Display Screen Interface
Overview of the controller's display screen, showing status indicators and information.
Power On/Off and Brightness Adjustment
Instructions for turning the device on/off and controlling brightness via the adjustment knob.
Color Temperature (CCT) Adjustment
Details on how to adjust the Color Correlated Temperature (CCT) of the light output.
Controller Operation: Advanced Settings
Menu Navigation and Settings
Guide to accessing and configuring Wireless, Bluetooth, DMX, Fan, and Dimmer settings via the menu.
DMX Practical Form
A table outlining DMX parameters like address, operation, CCT, and FX for control.
Controller Operation: Effects and System
Light Effect (FX) Settings
Instructions for selecting and adjusting various simulated light effects like flash, lightning, and TV.
System Reset and Version Information
Procedures for resetting the device to factory defaults and checking firmware version.
Performance Data: V-mount Battery
Maximum Brightness with V-mount Battery
Presents maximum brightness percentages for different V-mount battery configurations and cooling modes.
Performance Data: AC Power and Fan Modes
Maximum Brightness with AC Power
Shows maximum brightness percentages based on fan mode when supplied by AC power.
Maximum Brightness with V-mount Battery & Fan Modes
Compares maximum brightness with V-mount battery across various fan operating modes.
System Features and Troubleshooting
Software Upgrade Procedure
Instructions for downloading and installing new firmware for the device via a USB disk.
Over-Temperature Protection
Explanation of the device's thermal protection mechanism and behavior when overheating.
Fan Troubleshooting
Guidance on identifying and resolving issues related to the device's fan functionality.
Maintenance and Technical Data
Product Maintenance Guidelines
General advice on maintaining the product, including warranty service and unauthorized repairs.
Illuminance Testing Data
Presents lux and fc measurements for M200Bi and M300Bi at different CCTs and distances.
Technical Specifications and Compliance
Technical Data Summary
Lists detailed technical specifications for both M200Bi and M300Bi models.
FCC Statement and Declarations
Details FCC compliance, RF exposure requirements, and EU conformity declarations.
Product Warranty Information
Warranty Card and Service Access
Instructions for filling the warranty card and how to obtain maintenance service.
Inapplicable Cases for Guarantee
Lists specific scenarios and conditions under which the product warranty is not valid.

Table of Contents