Related Manuals for Futech SPINNER GREEN
Summarization of Contents
Overview of Device Components
Device Components Identification
Lists and identifies the primary parts of the laser device and its remote control.
Quick Start Guide
Power Button Operation
Instructions for switching the device ON/OFF and its basic function.
Arrow Button Functions
Details on using arrow buttons for slope adjustment and axis movement.
Speed and Scan Functions
How to change spinning speed and select scan modes.
Slope and Tilt Security
Information on activating slope and tilt security features.
Turn Buttons and LED Indicators
Using turn buttons and understanding LED status indicators.
Safety Instructions
First Time Usage
Steps for initial setup, including foil removal and battery insertion.
Battery and Charger
Details on laser and remote control battery types and charging.
Device Usage and Functions
Horizontal Alignment
Procedure for setting up the laser for horizontal alignment.
Plumb Line Projection
Using plumb lines to transfer points between floor and ceiling.
Vertical Alignment
Procedure for setting up the laser for vertical alignment.
Projecting 90° Angles
How to project precise 90° angles using the laser.
Spinning Speed Adjustment
Details on changing the laser's rotational speed.
Scan Function
Using the scan function to limit the laser beam angle.
Slope Function Setup
Instructions for setting horizontal and vertical slopes.
Need help?
Do you have a question about the SPINNER GREEN and is the answer not in the manual?
Questions and answers