Related Manuals for Unverferth NutriMax 2600
Summarization of Contents
Safety
General Hazard Information
Explains safety symbols and operator responsibility for accident prevention.
Safety Decals
Identifies and illustrates various safety decals on the applicator and their purpose.
Transport Safety
Covers safe practices for moving the applicator on roads and off-highway.
Chemical Hazards
Covers risks associated with working with agricultural chemicals.
Set Up
Pre-Delivery Checklist
A checklist of tasks to perform before the applicator is delivered to the customer.
Dealer Set Up Procedures
Initial setup steps performed by the dealer, including safety and attachments.
Axle Tread and Wheel Spacing
Guidelines for setting wheel spacing and adjusting axle tread for stability.
Controller Calibration Settings
Table of settings for calibrating the "BOOM CAL" monitor for different toolbar sizes.
Operation
Hitching to the Tractor
Instructions for connecting the applicator hitch to the tractor drawbar.
Hydraulic Connections
Connecting the applicator pump to tractor hydraulic circuits and function settings.
Toolbar Folding and Unfolding
Procedures for unfolding and folding the toolbar wings for operation and transport.
Inductor Operation
Steps for using the inductor to mix chemicals into the solution tank.
Maintenance
Lubrication Schedule
Chart detailing lubrication points, quantities, and recommended intervals for different toolbar models.
Purging A Hydraulic System
Step-by-step guide to remove air from the hydraulic system.
Toolbar & Wing Adjustments
Procedures for adjusting toolbar and wing components for proper operation.
Troubleshooting
Common problems, their possible causes, and corrective actions for the applicator.
Need help?
Do you have a question about the NutriMax 2600 and is the answer not in the manual?
Questions and answers