Unverferth NutriMax 1400 Manual
  1. Manuals
  2. Brands
  3. Unverferth Manuals
  4. Farm Equipment
  5. NutriMax 1400
  6. Manual

Unverferth NutriMax 1400 Manual

Liquid fertilizer applicator 1400 gallon
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Fertilizer Applicator
NutriMax
Liquid Applicator
®
1400 Gallon Model
Serial Number B35940100 & Higher
Part No. 412375

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NutriMax 1400 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Unverferth NutriMax 1400

Summary of Contents for Unverferth NutriMax 1400

  • Page 1 Fertilizer Applicator NutriMax Liquid Applicator ® 1400 Gallon Model Serial Number B35940100 & Higher Part No. 412375...

  • Page 2: Foreword

    — Introduction 1400 NutriMax Liquid Applicator Foreword This symbol identifies important safety messages. When you see it, read the message that follows and be alert to the possibility of personal injury. Remember, safety instructions stated in this manual are for your protection. Read them care- fully and follow them closely when working around or using this machine.

  • Page 3: Product Information

    The information, specifications, and illustrations in the manual are based on information available at the time it was written. Due to continuing improvements in the design and manufacture of Unverferth products, all specifications and information contained herein are subject to change without notice.

  • Page 4: Table Of Contents

    — Introduction 1400 NutriMax Liquid Applicator Table of Contents Introduction Foreword ..............................2 Product Information ..........................3 Section I Safety General Hazard Information ........................1-2 Safety Decals ............................1-3 Following Safety Instructions ........................1-4 Before Operating ............................ 1-5 Before Servicing ............................. 1-6 During Operation ............................
  • Page 5 — Introduction 1400 NutriMax Liquid Applicator Table of Contents Section II Set Up Pre-Delivery Checklist ........................2-2 Dealer Set Up ........................... 2-3 Hitch Extension ........................... 2-3 Wheels & Tires ........................... 2-4 Coulter Assemblies ........................2-4 Gauge Wheels ..........................2-7 Amber Warning Light Brackets ....................2-7 SMV Emblem &...
  • Page 6 — Introduction 1400 NutriMax Liquid Applicator Table of Contents Section III Operation Preparing Tractor ..........................3-2 Preparing Applicator .......................... 3-2 Hardware ............................. 3-2 Pivot Pins ........................... 3-2 Hitch ............................3-2 Hydraulic System ........................3-2 Tires/Wheels ..........................3-3 Lubrication ..........................3-3 Hitching to the Tractor ........................
  • Page 7 — Introduction 1400 NutriMax Liquid Applicator Table of Contents Section IV Maintenance Applicator Maintenance ........................4-2 Seasonal Storage ........................4-2 Purging Hydraulic System ......................4-3 Relieving Hydraulic Pressure ...................... 4-4 Lubrication ............................4-5 Hydraulically Driven Centrifugal Pump ....................4-6 ACE HYD 750 Barrier Fluid ......................4-6 Toolbar &...
  • Page 8 — Introduction 1400 NutriMax Liquid Applicator Table of Contents Section V Parts Please visit www.unverferth.com/parts/ for the most current parts listing. Tongue Components ...........................5-2 Center Toolbar & Latch Components ......................5-4 Upper, Front Frame Components .......................5-6 Lower, Front Frame Components ......................5-8 Rear Frame Components .........................5-10...

  • Page 9: Section I

    — Safety 1400 NutriMax Liquid Applicator Section I Safety General Hazard Information ......................1-2 Safety Decals ..........................1-3 Following Safety Instructions ......................1-4 Before Operating ..........................1-5 Before Servicing ..........................1-6 During Operation ..........................1-7 Before Transporting ......................... 1-7 During Transport ..........................1-7 Pressurized Oil ..........................

  • Page 10: General Hazard Information

    It is true that the designer, the manufacturer, and the safety engineer can help; and they will help, but their combined efforts can be wiped out by a single careless act of the operator. It is said that, “the best kind of a safety device is a careful operator.” We, at Unverferth Mfg.

  • Page 11: Safety Decals

    — Safety 1400 NutriMax Liquid Applicator Safety Decals • REPLACE LOST, DAMAGED, PAINTED, OR UNREADABLE DECALS IMMEDIATELY. IF PARTS THAT HAVE DECALS ARE REPLACED, ALSO MAKE SURE TO INSTALL NEW DECALS. THESE DECALS INFORM AND REMIND THE OPERATOR WITH OPERATIONAL INFORMATION AND SAFETY MESSAGES. Part No. TA510079 Part No. 9003127 Amber Reflector Part No.

  • Page 12: Following Safety Instructions

    — Safety 1400 NutriMax Liquid Applicator Following Safety Instructions • Read and understand this operator’s manual before operating. • All machinery should be operated only by trained and authorized personnel. • To prevent machine damage, use only attachments and service parts approved by the manufacturer.

  • Page 13: Before Operating

    — Safety 1400 NutriMax Liquid Applicator Before Operating • Do not stand between towing vehicle and implement during hitching. • Always make certain everyone and everything is clear of the machine before beginning operation. • Ensure that all applicable safety decals are installed and legible. •...

  • Page 14: Before Servicing

    — Safety 1400 NutriMax Liquid Applicator Before Servicing • Avoid working under an implement; however, if it becomes absolutely unavoidable, make sure the implement is safely blocked. • Ensure that all applicable safety decals are installed and legible. • When working around the implement, be careful not to be cut by sharp edges. •...

  • Page 15: During Operation

    — Safety 1400 NutriMax Liquid Applicator During Operation • Regulate speed to field conditions. Maintain complete control at all times. • Never service or lubricate equipment when in operation. • Keep away from overhead power lines. Electrical shock can cause serious injury or death.

  • Page 16: Pressurized Oil

    — Safety 1400 NutriMax Liquid Applicator Pressurized Oil • Relieve pressure before disconnecting hydraulic lines from tractor, loosening any hydraulic fittings or servicing hydraulic system. See hydraulic power unit manual for procedure to relieve pressure. • High-pressure fluids can penetrate the skin and cause serious injury or death. Use a piece of cardboard or wood to detect leaks of hydraulic fluid under pressure.

  • Page 17: Chemical Hazards

    — Safety 1400 NutriMax Liquid Applicator Chemical Hazards • Always wear personal protective equipment when working with or near chemicals. This equipment includes, but is not limited to: protective eye wear, gloves, shoes, socks, long-sleeved shirt, and long pants. Additional protection may be required for many types of chemicals.

  • Page 18: Preparing For Emergencies

    — Safety 1400 NutriMax Liquid Applicator Preparing for Emergencies • Keep a first aid kit and properly rated fire extinguisher nearby. • Keep emergency numbers for fire, rescue, and poison control personnel near the phone. Wearing Protective Equipment • Wear clothing and personal protective equipment appropriate for the job. •...

  • Page 19: Set Up

    — Set Up 1400 NutriMax Liquid Applicator Section II Set Up Pre-Delivery Checklist ........................ 2-2 Dealer Set Up ..........................2-3 Hitch Extension ........................2-3 Wheels & Tires ........................2-4 Coulter Assemblies ......................2-4 Gauge Wheels ........................2-7 Amber Warning Light Brackets ................... 2-7 SMV Emblem &...

  • Page 20: Pre-Delivery Checklist

    — Set Up 1400 NutriMax Liquid Applicator Pre-Delivery Checklist o Power wash any road salt off this unit to help prevent corrosion. o Torque wheel nuts and check tire pressure as specified in MAINTENANCE section. o Axles are adjusted from shipping position to desired operating width. o All grease fittings have been lubricated.

  • Page 21: Dealer Set Up

    — Set Up 1400 NutriMax Liquid Applicator Dealer Set Up • AFTER INITIAL SET-UP OR REPLACEMENT OF ANY HYDRAULIC COMPONENT ON THE APPLICATOR, AIR MUST BE REMOVED FROM THE WING-FOLD HYDRAULIC SYSTEM PRIOR TO ITS FIRST USE. FAILURE TO DO SO MAY RESULT IN DAMAGE TO TOOLBAR COMPONENTS DUE TO RAPID MOVEMENT.

  • Page 22: Wheels & Tires

    — Set Up 1400 NutriMax Liquid Applicator Dealer Set Up (continued) Wheels & Tires 1. Attach empty applicator to tractor. Refer to “Hitching to the Tractor” in OPERATION section. 2. The wheels are shipped in the narrowest setting. Refer to “Axle Tread Setting” in this section for proper spacing.
  • Page 23 — Set Up 1400 NutriMax Liquid Applicator Dealer Set Up (continued) 2. Using support stands rated at a minimum of 3,000 lbs. per side, position stands at the ends of the main wings (FIG. 2-3). Then lower the main wing. Place stands under main wings.
  • Page 24 — Set Up 1400 NutriMax Liquid Applicator Dealer Set Up (continued) Note: All but the center coulter post allows for four height settings, all of the mounted Hole 4: not used coulter posts are in the shortest position from the factory. The center coulter post Hole 3: not used allows for three height settings.

  • Page 25: Gauge Wheels

    9/16JICFX9/16JICFX14 9007278 HOSE HOLDER 9004213 DECAL - UM LOGO TAIL 9007320 METAL CABLE CLAM 9004298 DECAL - UM LOGO WIDE CFX76 9004309 HYD HOSE 1/4" 9007463 HOSE MARKER-MAI — Set Up 1400 NutriMax Liquid Applicator TENSION 9/16JICFX9/16JICFX72 DOWN 9004660 HYDRAULIC CYLINDER 3"X16" 9007464 HOSE MARKER-MAI CFX151...

  • Page 26: Smv Emblem & Sis Decals

    — Set Up 1400 NutriMax Liquid Applicator Dealer Set Up (continued) SMV Emblem & SIS Decals 1. Remove the protective film from SMV and ensure it is visible from the rear of the unit. (FIG. 2-8) SMV Emblem NOTE: Ensure front and rear SIS decals are clean and visible after shipping.

  • Page 27: Axle Tread Settings

    — Set Up 1400 NutriMax Liquid Applicator Axle Tread Setting Wheel Spacing Combinations • USE EXCEPTIONAL CARE WHEN OPERATING APPLICATOR EQUIPPED WITH SINGLE TIRES SET AT NARROW WHEEL SPACING. THE POSSIBILITY OF TIPPING OVER DURING TURNS OR TRAVEL ON ROUGH ROADS IS INCREASED UNDER THESE CONDITIONS. The axle spacing is infinitely adjustable between minimum and maximum settings.

  • Page 28: Adjustment

    — Set Up 1400 NutriMax Liquid Applicator Axle Tread Setting (continued) Adjustment • IMPROPER AXLE ADJUSTMENT CAN CAUSE AXLE TO SEPARATE FROM APPLICATOR, RESULTING IN PERSONAL INJURY OR DEATH DUE TO APPLICATOR OR AXLE FALL- ING. • USE CARE THAT APPLICATOR DOES NOT FALL FROM SUPPORT STANDS DURING ADJUSTMENT.
  • Page 29 — Set Up 1400 NutriMax Liquid Applicator Axle Tread Setting (continued) • Always adjust axles equally. 1. Hitch applicator to tractor to help stabilize unit. Refer to “Hitching to the Tractor” in OPERATION section. 2. Using a safe lifting device and supports rated at 7,000 lbs., raise one side of the empty applicator and place on stands.

  • Page 30: Setting Up Controller

    — Set Up 1400 NutriMax Liquid Applicator Setting Up Controller Refer to the appropriate Raven manual or OEM rate controller manual if applicable. “BOOM CAL” Monitor Settings TOOLBAR SIZE SPACING SECTION 1 SECTION 2 SECTION 3 SECTION 4 SECTION 5 40’...

  • Page 31: Pump Hydraulic System Set Up

    — Set Up 1400 NutriMax Liquid Applicator Pump Hydraulic System Set Up For set up of a PWM (Pulse Width Modulated) or non-PWM pump, refer to your Rate con- troller manual for details. For specific details related to your product pump, please refer to your pump manual.

  • Page 32: Rcm Set Up

    — Set Up 1400 NutriMax Liquid Applicator RCM Set Up Whenever the tractor is turned off or the ECU FIG. 2-12 for the applicator loses power, the following steps will have to be performed in order for the RCM to function properly right away. NOTE: Before programming the RCM, ensure the RCM monitor is connected to the battery.
  • Page 33 — Set Up 1400 NutriMax Liquid Applicator RCM Set Up (continued) NOTE: 40 FT. - 66 FT. units will have 5 sections. 80 FT. - 90 FT. units will have 6 sections. 4. Under “Number of Sections”, select 5 for 40 FT.
  • Page 34 — Set Up 1400 NutriMax Liquid Applicator RCM Set Up (continued) 7. No action required on this screen. Make sure this matches toolbar size and section widths. Continue to next page. (FIG 2-18) FIG. 2-18 8. Under “Pressure Sensor 1”, select “0-250 psi (1-5V)”.
  • Page 35 — Set Up 1400 NutriMax Liquid Applicator RCM Set Up (continued) 10. For the auxilary functions: uncheck both boxes. Click next page. (FIG. 2-21) FIG. 2-21 11. “Product 1” is the set up for the liquid. For “Control Valve Type”, always select “PWM”. (FIG.
  • Page 36 — Set Up 1400 NutriMax Liquid Applicator RCM Set Up (continued) 16. For “Flowmeter Calibration”, check the tag on the flowmeter and enter the value. (FIG. 2-24) 17. Under “Flowmeter Pulse/Units” enter 10 gal. Click next page. (FIG. 2-24) FIG. 2-24 18.
  • Page 37 — Set Up 1400 NutriMax Liquid Applicator RCM Set Up (continued) 27. Enter 20 for “Off Rate Alarm” and check FIG. 2-27 box. Click next page. (FIG. 2-27) NOTE: Alarm prompts when over 20% off target rate. NOTE: “Number of Products” corresponds to liquid application.

  • Page 38: Pwm Pump Start Up Procedure (Rate Control Module)

    — Set Up 1400 NutriMax Liquid Applicator RCM Set Up (continued) PWM Pump Start Up Procedure (Rate Control Module) Whenever the tractor is turned off or the ECU for FIG. 2-29 the PWM Pump loses power, the following steps will have to be performed in order for the PWM Pump to function properly right away.

  • Page 39: Applicator Calibration

    — Set Up 1400 NutriMax Liquid Applicator Applicator Calibration Determine Required Nozzle Size Use the following procedure to assist with sizing the nozzle and calibrating the applicator. Additional information can be found in the rate controller owner’s manual and also obtained from nozzle manufacturers.

  • Page 40: Overhead Layout Legend

    — Set Up 1400 NutriMax Liquid Applicator Overhead Layout - Legend 415752B - Coulter Post Assembly (Straight Post) 415753B - Center Coulter 411261B - Gauge 415754B - Coulter Post Post Assembly Wheel Assembly Assembly (Offset Post) (Straight Post) 60911 - Mounted Tire & Overhead Front Overhead...

  • Page 41: Rigid 40' Toolbar - 30" Row Spacing

    — Set Up 1400 NutriMax Liquid Applicator Overhead Layout - Rigid 40’ Toolbar - 30” Row Spacing 2-23...

  • Page 42: 40' Toolbar - 20" Row Spacing

    — Set Up 1400 NutriMax Liquid Applicator Overhead Layout - 40’ Toolbar - 20” Row Spacing 2-24...

  • Page 43: 44' Toolbar - 22" Row Spacing

    — Set Up 1400 NutriMax Liquid Applicator Overhead Layout - 44’ Toolbar - 22” Row Spacing 2-25...

  • Page 44: 40' Toolbar - 30" Row Spacing

    — Set Up 1400 NutriMax Liquid Applicator Overhead Layout - 40’ Toolbar - 30” Row Spacing 2-26...

  • Page 45: 40' Toolbar - 36" Row Spacing

    — Set Up 1400 NutriMax Liquid Applicator Overhead Layout - 40’ Toolbar - 36” Row Spacing 2-27...

  • Page 46: 40' Toolbar - 38" Row Spacing

    — Set Up 1400 NutriMax Liquid Applicator Overhead Layout - 40’ Toolbar - 38” Row Spacing 2-28...

  • Page 47: Rigid 40' Toolbar - Double Coulter 30" Row Spacing

    — Set Up 1400 NutriMax Liquid Applicator Overhead Layout - Rigid 40’ Toolbar - Double Coulter - 30” Row Spacing 2-29...

  • Page 48: Folding 40' Toolbar - Double Coulter 30" Row Spacing

    — Set Up 1400 NutriMax Liquid Applicator Overhead Layout - Folding 40’ Toolbar - Double Coulter - 30” Row Spacing 2-30...

  • Page 49: For Inductor Information, Please Refer To Your Inductor Manual

    — Operation 1400 NutriMax Liquid Applicator Section III Operation Preparing Tractor ........................3-2 Preparing Applicator ........................3-2 Hardware ..........................3-2 Pivot Pins ..........................3-2 Hitch ............................ 3-2 Hydraulic System ......................... 3-2 Tires/Wheels ......................... 3-3 Lubrication ........................... 3-3 Hitching to the Tractor ......................3-4 Drawbar Hitching .........................

  • Page 50: Preparing Tractor

    — Operation 1400 NutriMax Liquid Applicator Preparing Tractor • Before operating applicator, read the tractor operator’s manual and gain an understanding of its safe methods of operation. • Check the tractor brakes and transport lights. Make sure they are in proper working order. •...

  • Page 51: Tires/Wheels

    — Operation 1400 NutriMax Liquid Applicator Preparing Applicator (continued) Tires/Wheels Check tire pressures and maintain at recommended values listed in the MAINTENANCE section. • IMPROPERLY TORQUED WHEEL NUTS/BOLTS CAN CAUSE A LOSS OF IMPLEMENT CONTROL AND MACHINE DAMAGE. WHEEL NUTS/BOLTS MUST BE CHECKED REGU- LARLY.

  • Page 52: Hitching To The Tractor

    — Operation 1400 NutriMax Liquid Applicator Hitching to the Tractor Drawbar Hitching • DO NOT STAND BETWEEN THE APPLICATOR AND TRACTOR WHEN HITCHING. ALWAYS ENGAGE PARKING BRAKE AND STOP ENGINE BEFORE INSERTING HITCH PIN. FIG. 3-1 • Tractors with rear duals must use the bolt- on hitch extension (410887G or 410887R) and associated hardware (FIG.

  • Page 53: Transport Chain

    — Operation 1400 NutriMax Liquid Applicator Hitching to the Tractor (continued) Transport Chain • REPLACE TRANSPORT CHAIN IF ANY LINK OR END FITTING IS BROKEN, STRETCHED OR DAMAGED. DO NOT WELD TRANSPORT CHAIN. Always use intermediate chain support when Transport chain connection shown for connecting the applicator directly to a tractor.

  • Page 54: Hydraulic Connections

    — Operation 1400 NutriMax Liquid Applicator Hitching to the Tractor (continued) Hydraulic Connections After cleaning hydraulic hose couplers, connect to tractor hydraulic circuits as follows: Applicator Pump Hydraulics • The applicator pump is hydraulically driven, and needs to be configured correctly to match the type of hydraulic system on the tractor FIG.

  • Page 55: Toolbar Hydraulics

    — Operation 1400 NutriMax Liquid Applicator Hitching to the Tractor (continued) Toolbar Hydraulics • DO NOT UNFOLD OR FOLD TOOLBAR WITHOUT HITCHING TO THE TRACTOR. The applicator has 4 sets of hydraulic hoses. NOTE: It is recommended to pressurize all hydraulic circuits using the retract outlets on the SCV’s.

  • Page 56: Jack Usage

    — Operation 1400 NutriMax Liquid Applicator Jack Usage • UNHITCHING A LOADED APPLICATOR CAN CAUSE SERIOUS INJURY OR DEATH DUE TO TONGUE RISING OR FALLING. ALWAYS HAVE A LOADED APPLICATOR ATTACHED TO A TRACTOR. Use jack to support an empty applicator, never a loaded applicator. Always have a loaded applicator hitched to tractor.

  • Page 57: Transporting

    — Operation 1400 NutriMax Liquid Applicator Transporting Drawbar Connection FIG. 3-8 • USE EXCEPTIONAL CARE WHEN OP- ERATING APPLICATOR EQUIPPED WITH SINGLE TIRES AND SET AT NARROW WHEEL SPACING. THE POSSIBILITY OF TIPPING OVER DURING TURNS OR TRAVEL ON ROUGH ROADS IS IN- CREASED UNDER THESE CONDITIONS.

  • Page 58: Toolbar Operation

    — Operation 1400 NutriMax Liquid Applicator Toolbar Operation • PERFORM TOOLBAR UNFOLDING AND FOLDING OPERATIONS ONLY IN AREAS WITH ADEQUATE HEIGHT, WIDTH AND LENGTH CLEARANCES. IN PARTICULAR, BE MIND- FUL OF LOCATION OF OVERHEAD POWER LINES. FAILURE TO DO SO CAN RESULT IN PERSONAL INJURY AND PROPERTY DAMAGE.

  • Page 59: Raise/Lower In The Field

    — Operation 1400 NutriMax Liquid Applicator Toolbar Operation (continued) Raise/Lower Toolbar In The Field NOTE: The tractor SCV 2 main wing fold/unfold circuit must be running in float at all times. NOTE: If unit is equipped with injection knives, the tractor must be moving forward when lowering toolbar into the ground.

  • Page 60: Dual Width Toolbar

    — Operation 1400 NutriMax Liquid Applicator Toolbar Operation (continued) Dual Width Toolbar 1. Fold the toolbar to 30’ for the dual width application. (FIG. 3-10) 2. Turn off sections 1 and 5 on the flow con- troller, and turn on the chemsaver valves to the outside coulters on each main wing.

  • Page 61: Filling Applicator

    — Operation 1400 NutriMax Liquid Applicator Filling Applicator Quick Fill • NEVER LEAVE APPLICATOR UNATTENDED WHILE FILLING. TANK CONTENTS MAY SPILL OUT OF AIR VENTS IF OVERFILLED. • The tank is designed with additional air expansion space in excess of the rated capacity. The full capacity can be reached with the level approximately 6”- 8”...

  • Page 62: Inductor

    — Operation 1400 NutriMax Liquid Applicator Inductor Basic Operation FIG. 3-12 • The main solution tank should contain at least 50 gallons of liquid. The INDUCTION VALVE, INDUCTOR MIX VALVE, and tank are shown in FIG. 3-12 and 3-13 for reference.

  • Page 63: Jug And Inductor Tank Rinsing

    — Operation 1400 NutriMax Liquid Applicator Inductor (continued) Jug and Inductor Tank Rinsing • ALWAYS WEAR PERSONAL PROTECTIVE EQUIPMENT WHEN WORKING WITH OR NEAR CHEMICALS. THIS EQUIPMENT INCLUDES, BUT IS NOT LIMITED TO: PROTECTIVE EYE WEAR, GLOVES, SHOES, SOCKS, LONG-SLEEVED SHIRT, AND LONG PANTS. AD- DITIONAL PROTECTION MAY BE REQUIRED FOR MANY TYPES OF CHEMICALS.

  • Page 64: Flowball Indicator

    — Operation 1400 NutriMax Liquid Applicator Flow Ball Indicator • ALWAYS WEAR PERSONAL PROTECTIVE EQUIPMENT WHEN WORKING WITH OR NEAR CHEMICALS. THIS EQUIPMENT INCLUDES, BUT IS NOT LIMITED TO: PROTECTIVE EYE WEAR, GLOVES, SHOES, SOCKS, LONG-SLEEVED SHIRT, AND LONG PANTS. AD- DITIONAL PROTECTION MAY BE REQUIRED FOR MANY TYPES OF CHEMICALS.

  • Page 65: Flow Ball For Half Rate Nozzles

    — Operation 1400 NutriMax Liquid Applicator Flow Ball Indicator (continued) 2. Select the flow indicator ball required for you application using the calculated flow rate and the guide below. Flow Indicator Ball Selector Guide Part Number Color Flow Rate - U.S. GPM Range 9007782 Green Polyproplene...
  • Page 66 — Operation 1400 NutriMax Liquid Applicator Flow Ball Indicator (continued) 3. Rotate the manifold assembly down carefully FIG. 3-20 to avoid any residual liquid that may be in the manifold to avoid coming in contact with exposed skin, eyes, or other sensitive areas.

  • Page 67: For Inductor Information, Please Refer To Your Inductor Manual

    — Maintenance 1400 NutriMax Liquid Applicator Section IV Maintenance Applicator Maintenance ......................4-2 Seasonal Storage ......................... 4-2 Purging Hydraulic System ....................4-3 Relieving Hydraulic Pressure ....................4-4 Lubrication ..........................4-5 Hydraulically Driven Centrifugal Pump ..................4-6 ACE HYD 750 Barrier Fluid....................4-6 Toolbar &...

  • Page 68: Applicator Maintenance

    — Maintenance 1400 NutriMax Liquid Applicator Applicator Maintenance • ELECTROCUTION WILL CAUSE SERIOUS INJURY OR DEATH. ELEC TROCUTION CAN OCCUR WITHOUT DIRECT CONTACT. KEEP AWAY FROM ALL ELECTRICAL LINES AND DEVICES. • TIPPING OR MOVEMENT OF THE MACHINE CAN CAUSE SERIOUS INJURY OR DEATH. BE SURE MACHINE IS SECURELY BLOCKED. • EYE PROTECTION AND OTHER APPROPRIATE PERSONAL PROTECTIVE EQUIPMENT MUST BE WORN WHILE SERVICING IMPLEMENT.

  • Page 69: Purging Hydraulic System

    — Maintenance 1400 NutriMax Liquid Applicator Applicator Maintenance (continued) Seasonal Storage (continued) Coat exposed cylinder piston rods with rust preventative material. Inspect machine for parts that may need to be replaced so they may be ordered in the off season. FIG.

  • Page 70: Relieving Hydraulic Pressure

    — Maintenance 1400 NutriMax Liquid Applicator Applicator Maintenance (continued) Relieving Hydraulic Pressure To relieve hydraulic pressure in the system, be sure hydraulic motor is disengaged and/or hydraulic cylinder is not exerting force on the system. Next, consult tractor operators manual for procedure to relieve pressure.

  • Page 71: Lubrication

    To keep your applicator in top operating condition and to assure its proper performance and reliability for a long period of time, periodic inspection and lubrication is a must. Unverferth Mfg. recommends use of NLGI #2 Extreme Pressure grease. The lubrication locations and recommended schedule are as follows:...

  • Page 72: Hydraulically Driven Centrifugal Pump

    — Maintenance 1400 NutriMax Liquid Applicator Hydraulically Driven Centrifugal Pump ACE HYD 750 Barrier Fluid • Inflation valve must be assembled in the “IN” port of the regulating valve. NOTE: During application, periodically check the regulating valve pressure gauge. (FIG. 4-2) FIG.

  • Page 73: Toolbar & Wing Adjustments

    — Maintenance 1400 NutriMax Liquid Applicator Toolbar & Wing Adjustments Several areas of adjustment have been designed into the toolbar to maintain proper wing folding operation throughout the life of the toolbar. • TIPPING OR MOVEMENT OF THE MACHINE CAN CAUSE SERIOUS INJURY OR DEATH. BE SURE MACHINE IS SECURELY BLOCKED.

  • Page 74: Center Toolbar & Main Wing Down Pressure

    — Maintenance 1400 NutriMax Liquid Applicator Toolbar & Wing Adjustments (continued) Center Toolbar & Main Wing Down Pressure Proper down pressure is achieved when the Main Wing gauge wheels contact the ground and maintain Down Pressure Adjustment the coulter depth. Excessive down pressure Port RV1 can cause unnecessary stress on the toolbar...

  • Page 75: Sequence Valve Adjustments

    — Maintenance 1400 NutriMax Liquid Applicator Toolbar & Wing Adjustments (continued) Sequence Valve Adjustments During sequence valve adjustment, disengage hydraulics, use ¼ turn adjustment, and then engage to check. Smaller increments may be used for fine tuning if needed. For all the cartridge adjustments on the block: The jam nut needs an 11/16”...

  • Page 76: Solution Filters

    — Maintenance 1400 NutriMax Liquid Applicator Solution Filters This applicator uses two filters to help ensure proper operation. These filters will need to be cleaned periodically during use and prior to applicator storage. • ALWAYS WEAR PERSONAL PROTECTIVE EQUIPMENT WHEN WORKING WITH OR NEAR CHEMICALS.

  • Page 77: Secondary Filter

    — Maintenance 1400 NutriMax Liquid Applicator Solution Filters (continued) Secondary Filter A secondary filter is located on the tongue near the toolbar electric valves. This filter is used to eliminate the need for strainers at the tips. To clean this filter, first drain the filter housing.

  • Page 78: Winterizing

    — Maintenance 1400 NutriMax Liquid Applicator Winterizing • ALWAYS WEAR PERSONAL PROTECTIVE EQUIPMENT WHEN WORKING WITH OR NEAR CHEMICALS. THIS EQUIPMENT INCLUDES, BUT IS NOT LIMITED TO: PROTECTIVE EYE WEAR, GLOVES, SHOES, SOCKS, LONG-SLEEVED SHIRT, AND LONG PANTS. AD- DITIONAL PROTECTION MAY BE REQUIRED FOR MANY TYPES OF CHEMICALS. •...

  • Page 79: Coulter Spring Replacement

    — Maintenance 1400 NutriMax Liquid Applicator Coulter Spring Replacement The following guidelines are for replacing the spring on the coulters. • KEEP HANDS CLEAR OF PINCH POINT AREAS. • EYE PROTECTION AND OTHER APPROPRIATE PERSONAL PROTECTIVE EQUIPMENT MUST BE WORN WHILE SERVICING IMPLEMENT. •...

  • Page 80: Coulter Hub Adjustment & Replacement

    — Maintenance 1400 NutriMax Liquid Applicator Coulter Hub Adjustment and Replacement The following instructions are for adjusting and lubricating the hub and replacing the “O”-ring and seal. After the first 100 acres, the hubs should be checked for tightness and wear. •...

  • Page 81: Coulter Hub Adjustment & Replacement

    — Maintenance 1400 NutriMax Liquid Applicator Coulter Hub Adjustment and Replacement (continued) • Always replace the “O”-ring and seal if dismantling the hub. Failure to do so could result in premature failure of hub and its components. D. Replace any damaged parts before reassembling the components. Be sure to remove any debris or dirt and repack bearings with an SAE approved hub grease.
  • Page 82 — Maintenance 1400 NutriMax Liquid Applicator Closer Wheel Adjustment and Replacement (Opt.) The following guidelines are for adjusting and replacing the closer wheel on the coulters. • KEEP HANDS CLEAR OF PINCH POINT AREAS. • SHARP EDGES ON COULTER BLADES CAN CAUSE SERIOUS INJURY. BE CAREFUL WHEN WORKING AROUND COULTER BLADES.
  • Page 83 — Maintenance 1400 NutriMax Liquid Applicator Closer Wheel Adjustment and Replacement (Opt.) (continued) 3. Remove four 1/2”-13UNC x 1 1/2” carriage FIG. 4-16 bolts (9501993-104) and four 1/2”-13UNC lock nuts (9501443-034) retaining the hub 1/2-13UNC 1/2-13UNC x 1 1/2 assembly (69161B) on the closer wheel Lock Nut Carriage Bolt (69142B), and hub strap (68315) on the hub.

  • Page 84: Flow Ball Indicator

    — Maintenance 1400 NutriMax Liquid Applicator Flow Ball Indicator Off-Season Storage: 1. Protect the flow monitors from UV degradation by covering the clear flow monitors to block exposure to sunlight. Storing unit in a dark building free from sunlight exposure is also acceptable.
  • Page 85 — Maintenance 1400 NutriMax Liquid Applicator Schematics - Plumbing - For SN B39050100 & Higher 4-19...
  • Page 86 — Maintenance 1400 NutriMax Liquid Applicator Schematics - Plumbing - For SN B39050099 & Lower 4-20...

  • Page 87: Hydraulic

    — Maintenance 1400 NutriMax Liquid Applicator Schematics - Hydraulic 4-21...
  • Page 88 — Maintenance 1400 NutriMax Liquid Applicator Schematics - Hyd. Hose Routing — Hoses to Tractor Ports A1, B1 9008556 - Hydraulic Hose 1/4 x 226 Ports A2, B2, B3 9007816 - Hydraulic Hose 1/4 x 204 Port A3 9004297 - Hydraulic Hose 1/4 x 222 Hose Markers Port A1 9007464 - Main Lift Up (RED)
  • Page 89 — Maintenance 1400 NutriMax Liquid Applicator Schematics - Hyd. Hose Routing — Toolbar Lift Cylinders Left-Hand Right-Hand Hydraulic Hydraulic Cylinder Cylinder 90° Elbow 90° Elbow Hydraulic Hydraulic Block Check Valve Hose Check Valve Hydraulic Hose 90° Elbow 90° Elbow Hydraulic Hydraulic Port C1 Hose...
  • Page 90 — Maintenance 1400 NutriMax Liquid Applicator Schematics - Hyd. Hose Routing — Main Wing & Wing Tilt Cylinders Right-Hand Left-Hand Hydraulic Block Hydraulic Hose Hydraulic Hose Hydraulic Block Hydraulic Hose Hydraulic Hydraulic Hose Hose Hydraulic Hose Reducer Reducer Check Valve Check Valve 90°...
  • Page 91 — Maintenance 1400 NutriMax Liquid Applicator Schematics - Hyd. Hose Routing — Toolbar Latch Cylinder Hydraulic Block Cylinder Adapter Hydraulic Hose Schematics - Hyd. Hose Routing — Outer Wing Cylinders Port D5 Right-Hand Left-Hand Hydraulic Hydraulic Hose Block Hydraulic Hose 90°...
  • Page 92 — Maintenance 1400 NutriMax Liquid Applicator Schematic — Electrical — Main Light Harness (9007719) 4-26...
  • Page 93 — Maintenance 1400 NutriMax Liquid Applicator Schematic — Electrical — Amber LED Lamp (9005142) 2 SHROUD WEATHER PACK CONNECTOR TURN AND FLASHER AMBER LIGHT (B) YELLOW - TURN AND FLASHER AMBER LIGHT GROUND (A) WHITE - GROUND Schematic — Electrical — Red LED Tail/Turn Light (9006282) 3 SHROUD WEATHER PACK CONNECTOR RED (A) - HIGH WHITE (B) - GROUND...
  • Page 94 — Maintenance 1400 NutriMax Liquid Applicator Schematics - ISO System Diagram 4-28...
  • Page 95 — Maintenance 1400 NutriMax Liquid Applicator Schematics - Less ISO Raven System Diagram For All Non Raven ISO Units For SN B41940100 & Higher 4-29...
  • Page 96 — Maintenance 1400 NutriMax Liquid Applicator Schematics - Less ISO Raven System Diagram For All Non Raven ISO Units & For Raven 450 Console For SN B41940099 & Lower 4-30...
  • Page 97 — Maintenance 1400 NutriMax Liquid Applicator Schematics - Original ISO Rate Node 4-31...
  • Page 98 — Maintenance 1400 NutriMax Liquid Applicator Schematics - Product Control II Node 4-32...
  • Page 99 — Maintenance 1400 NutriMax Liquid Applicator Schematics - SCS 450 4-33...
  • Page 100 — Maintenance 1400 NutriMax Liquid Applicator Schematics - Rate Contol Module (RCM) (UM #9503299) 4-34...
  • Page 101 — Maintenance 1400 NutriMax Liquid Applicator Schematics - SCS 450 Console 4-35...
  • Page 102 — Maintenance 1400 NutriMax Liquid Applicator 4-36...
  • Page 103 — Maintenance 1400 NutriMax Liquid Applicator 4-37...

  • Page 104: Troubleshooting

    — Maintenance 1400 NutriMax Liquid Applicator Troubleshooting Problem Possible Cause Corrective Action Not getting enough oil flow Check tractor SCV flow setting. Check hydraulic oil level in tractor. Remove the valves from the block. Lubricate the valve and re-check for Valve sticking No toolbar functions easy movement.

  • Page 105: Wheel, Hub And Spindle Disassembly And Assembly

    — Maintenance 1400 NutriMax Liquid Applicator Wheel, Hub and Spindle Disassembly and Assembly • TIPPING OR MOVEMENT OF THE MACHINE CAN CAUSE SERIOUS INJURY OR DEATH. BE SURE MACHINE IS SECURELY BLOCKED. • FALLING OBJECTS CAN CAUSE SERIOUS INJURY OR DEATH. DO NOT WORK UNDER THE MACHINE AT ANY TIME WHILE BEING HOISTED.
  • Page 106 — Maintenance 1400 NutriMax Liquid Applicator Wheel, Hub and Spindle Disassembly and Assembly (continued) 5. Inspect the spindle and replace if necessary. If spindle does not need to be replaced, skip to Step 6; otherwise continue with Step 5. Remove the bolt and lock nut that retain the spindle to the axle. Using a safe lifting device rated for 150 lbs., replace the old spindle with a new spindle.

  • Page 107: Wheels And Tires

    — Maintenance 1400 NutriMax Liquid Applicator Wheels and Tires Wheel Nut Torque Requirements • IMPROPERLY TORQUED WHEEL NUTS/BOLTS CAN CAUSE A LOSS OF IMPLEMENT CONTROL AND MACHINE DAMAGE. TORQUE WHEEL NUTS/BOLTS TO VALUES IN TABLE. CHECK TORQUE BEFORE USE, AFTER ONE HOUR OF UNLOADED USE OR AFTER FIRST LOAD, AND EACH LOAD UNTIL WHEEL NUTS/BOLTS MAINTAIN TORQUE VALUE.

  • Page 108: Tire Pressure

    Do not exceed maximum recommended tire pressure. achieve proper tire life. Tire Pressure for Top Air Sprayers Load Index / Ply Tire Make Tire Size Rating Unverferth Tire Part # Max PSI Firestone 99061 480/80R42 R-1 151 A8 Goodyear 99495...

  • Page 109: Tire Warranty

    — Maintenance 1400 NutriMax Liquid Applicator Wheels and Tires (continued) Tire Warranty For questions regarding new tire warranty, please contact your local original equipment tire dealer. Used tires carry no warranty. Following are phone numbers and Websites for your convenience: Firestone www.firestoneag.com Phone 800-847-3364...
  • Page 110 — Maintenance 1400 NutriMax Liquid Applicator Complete Torque Chart Capscrews - Grade 5 NOTE: • Grade 5 capscrews can be identified by three radial dashes on the head. • For wheel torque requirements, refer to Wheels and Tires. • Tighten U-bolts evenly and equally to have the same number of threads exposed on each end.
  • Page 111 — Maintenance 1400 NutriMax Liquid Applicator Complete Torque Chart Capscrews - Grade 8 NOTE: • Grade 8 capscrews can be identified by six radial dashes on the head. • For wheel torque requirements, refer to Wheels and Tires. • Tighten U-bolts evenly and equally to have the same number of threads exposed on each end.

  • Page 112: Hydraulic Fittings - Torque And Installation

    — Maintenance 1400 NutriMax Liquid Applicator Hydraulic Fittings – Torque and Installation SAE Flare Connection (J. I. C.) 1. Tighten nut with finger until it bottoms the seat. 2. Using a wrench, rotate nut to tighten. Turn nut 1/3 turn to apply proper torque. SAE Straight Thread O-Ring Seal 1.

  • Page 113: For Inductor Information, Please Refer To Your Inductor Manual

    — Parts 1400 NutriMax Liquid Applicator Section V Parts Please visit www.unverferth.com/parts/ for the most current parts listing. Tongue Components ........................5-2 Center Toolbar & Latch Components ..................5-4 Upper, Front Frame Components ....................5-6 Lower, Front Frame Components ....................5-8 Rear Frame Components ......................

  • Page 114: Tongue Components

    — Parts 1400 NutriMax Liquid Applicator Tongue Components Please visit www.unverferth.com/parts/ for the most current parts listing.
  • Page 115 — Parts 1400 NutriMax Liquid Applicator Tongue Components Please visit www.unverferth.com/parts/ for the most current parts listing. ITEM PART NUMBER DESCRIPTION NOTES 414330G Tongue Weldment =Green= Includes Items 8, 10, 11, 20, 21, 23 & 24 414330R Tongue Weldment =Red= Includes Items 17 &...

  • Page 116: Center Toolbar & Latch Components

    — Parts 1400 NutriMax Liquid Applicator Center Toolbar & Latch Components Please visit www.unverferth.com/parts/ for the most current parts listing.
  • Page 117 — Parts 1400 NutriMax Liquid Applicator Center Toolbar & Latch Components Please visit www.unverferth.com/parts/ for the most current parts listing. ITEM PART NUMBER DESCRIPTION NOTES 410446 Plate-Retainer, Pin 411506G Latch Weldment =GREEN= 411506R Latch Weldment =RED= 414313G Toolbar Center Section Weldment =GREEN=...

  • Page 118: Upper, Front Frame Components

    — Parts 1400 NutriMax Liquid Applicator Upper, Front Frame Components Please visit www.unverferth.com/parts/ for the most current parts listing.
  • Page 119 — Parts 1400 NutriMax Liquid Applicator Upper, Front Frame Components Please visit www.unverferth.com/parts/ for the most current parts listing. ITEM PART NUMBER DESCRIPTION NOTES 411586G Tank Support Weldment =GREEN= 411586R Tank Support Weldment =RED= 411639G Perimeter Weldment, LH =GREEN= 411639R...

  • Page 120: Lower, Front Frame Components

    — Parts 1400 NutriMax Liquid Applicator Lower, Front Frame Components Please visit www.unverferth.com/parts/ for the most current parts listing.
  • Page 121 — Parts 1400 NutriMax Liquid Applicator Lower, Front Frame Components Please visit www.unverferth.com/parts/ for the most current parts listing. ITEM PART NUMBER DESCRIPTION NOTES 411586G Tank Support Weldment =GREEN= 411586R Tank Support Weldment =RED= 411670 Pad - Frame Guide 411673G...

  • Page 122: Rear Frame Components

    — Parts 1400 NutriMax Liquid Applicator Rear Frame Components Please visit www.unverferth.com/parts/ for the most current parts listing. 5-10...
  • Page 123 — Parts 1400 NutriMax Liquid Applicator Rear Frame Components Please visit www.unverferth.com/parts/ for the most current parts listing. ITEM PART NUMBER DESCRIPTION NOTES 410677G Cross Tube =GREEN= 410677R Cross Tube =RED= 410757G Clean Water Tank Mount Weldment =GREEN= 410757R Clean Water Tank Mount Weldment =RED=...

  • Page 124: Clean Water Tank Components

    — Parts 1400 NutriMax Liquid Applicator Clean Water Tank Components Please visit www.unverferth.com/parts/ for the most current parts listing. ITEM PART NUMBER DESCRIPTION NOTES 410942 10 Gallon Clean Water Tank Assembly (Gray) Includes Items 1-6 9007237 10 Gallon Tank (Gray) TA808275 Poly 90°...
  • Page 125 — Parts 1400 NutriMax Liquid Applicator Notes Please visit www.unverferth.com/parts/ for the most current parts listing. 5-13...

  • Page 126: Axle And Hub Components

    — Parts 1400 NutriMax Liquid Applicator Axle and Hub Components Please visit www.unverferth.com/parts/ for the most current parts listing. 5-14...
  • Page 127 — Parts 1400 NutriMax Liquid Applicator Axle and Hub Components Please visit www.unverferth.com/parts/ for the most current parts listing. 28ITEM PART NUMBER DESCRIPTION NOTES Includes Items 2 through 19 412344B (For 20”, 22”, 30” Row Spacing) Axle Assembly =BLACK= Includes Items 2 through 19 414131B (For 36”...

  • Page 128: Tank & Baffle 1400 Gallon Components

    — Parts 1400 NutriMax Liquid Applicator Tank & Baffle 1400 Gallon Components Please visit www.unverferth.com/parts/ for the most current parts listing. 5-16...
  • Page 129 — Parts 1400 NutriMax Liquid Applicator Tank & Baffle 1400 Gallon Components Please visit www.unverferth.com/parts/ for the most current parts listing. ITEM PART NUMBER DESCRIPTION NOTES 412378 1400 Gray Tank With Holes 9390-030 Capscrew 5/16”-18UNC x 1” Grade 5 9008576 For SN B39050100 &...

  • Page 130: Wheel & Tire Components

    — Parts 1400 NutriMax Liquid Applicator Wheel & Tire Components Please visit www.unverferth.com/parts/ for the most current parts listing. 5-18...
  • Page 131 — Parts 1400 NutriMax Liquid Applicator Wheel & Tire Components Please visit www.unverferth.com/parts/ for the most current parts listing. ITEM PART NUMBER DESCRIPTION NOTES 110487SM 13 x 46 Wheel w/0.00” Offset 110487SM /902519 Tire 380/90x46 R-1W 110488SM 10 x 50 Wheel w/0.00” Outset...

  • Page 132: Center Toolbar To Main Wing Components

    — Parts 1400 NutriMax Liquid Applicator Center Toolbar to Main Wing Components Please visit www.unverferth.com/parts/ for the most current parts listing. 5-20...
  • Page 133 — Parts 1400 NutriMax Liquid Applicator Center Toolbar to Main Wing Components Please visit www.unverferth.com/parts/ for the most current parts listing. ITEM PART NUMBER DESCRIPTION NOTES 95123 Tension Spring Bushing 411619 Main Wing Pin Weldment 411740B Anti-Rotation, Cylinder Plate 411741 Cylinder Pin 1 1/4"...
  • Page 134 — Parts 1400 NutriMax Liquid Applicator Main Wing to Outer Wing Components — Rigid Toolbar Beginning with Serial Number B36910100 Please visit www.unverferth.com/parts/ for the most current parts listing. 5-22...
  • Page 135 — Parts 1400 NutriMax Liquid Applicator Main Wing to Outer Wing Components — Rigid Toolbar Beginning with Serial Number B36910100 Please visit www.unverferth.com/parts/ for the most current parts listing. ITEM PART NUMBER DESCRIPTION NOTES 411427B Clamp Plate 9003816 Poly Clamp Pair (0.54) 9390-031 Capscrew 5/16"-18UNC x 1 1/4"...
  • Page 136 — Parts 1400 NutriMax Liquid Applicator Main Wing to Outer Wing Components — Folding Toolbar Beginning with Serial Number B36910100 Please visit www.unverferth.com/parts/ for the most current parts listing. ITEM PART NUMBER DESCRIPTION NOTES 254468 Auger Stop Pad (3 x 4) 405338 Cylinder Pin 1"...
  • Page 137 — Parts 1400 NutriMax Liquid Applicator Main Wing to Outer Wing Components — Folding Toolbar Beginning with Serial Number B36910100 Please visit www.unverferth.com/parts/ for the most current parts listing. ITEM PART NUMBER DESCRIPTION NOTES 411681B Wing Rest Weldment =BLACK= 411686B...
  • Page 138 — Parts 1400 NutriMax Liquid Applicator Main Wing to Outer Wing Components — Folding Toolbar Prior to Serial Number B36910100 Please visit www.unverferth.com/parts/ for the most current parts listing. ITEM PART NUMBER DESCRIPTION NOTES 254468 Auger Stop Pad (3 x 4) 405338 Cylinder Pin 1"...
  • Page 139 — Parts 1400 NutriMax Liquid Applicator Main Wing to Outer Wing Components — Folding Toolbar Prior to Serial Number B36910100 Please visit www.unverferth.com/parts/ for the most current parts listing. ITEM PART NUMBER DESCRIPTION NOTES 411628G Outer Wing Weldment =GREEN= 411628R...

  • Page 140: Section Manifold Components

    — Parts 1400 NutriMax Liquid Applicator 5 Section Manifold Components Please visit www.unverferth.com/parts/ for the most current parts listing. ITEM PART NUMBER DESCRIPTION NOTES 412440B Product Valves - 5 Section Assembly 402255 2” Strainer 411906B Ball Valve Mount Weldment =Black=...
  • Page 141 — Parts 1400 NutriMax Liquid Applicator 5 Section Manifold Components Please visit www.unverferth.com/parts/ for the most current parts listing. ITEM PART NUMBER DESCRIPTION NOTES 9006801 Five Ball Valve Assembly 9006626 O-Ring TA815025 2" Flange Clamp TA854881 Ball Valve Assembly TA854874...

  • Page 142: Strainer

    — Parts 1400 NutriMax Liquid Applicator Strainer Please visit www.unverferth.com/parts/ for the most current parts listing. ITEM PART NUMBER DESCRIPTION QTY. NOTES 402255 Strainer Complete 2” Flange 403257 Strainer Head TA869070 Screen, 50 Mesh (Gentain Blue) TA867486 Gasket, EPDM TA868842...

  • Page 143: Flow Ball Components

    — Parts 1400 NutriMax Liquid Applicator Flow Ball Components Please visit www.unverferth.com/parts/ for the most current parts listing. DETAIL A (TYPICAL) Ø1/2" RED CELRON Ø1/2 MAROON GLASS Ø1/2" STAINLESS STEEL DETAIL B Ø7/16" STAINLESS STEEL DETAIL C 5-31...
  • Page 144 — Parts 1400 NutriMax Liquid Applicator Flow Ball Components Please visit www.unverferth.com/parts/ for the most current parts listing. 5-32...
  • Page 145 — Parts 1400 NutriMax Liquid Applicator Flow Ball Components Please visit www.unverferth.com/parts/ for the most current parts listing. ITEM PART NUMBER DESCRIPTION QTY. NOTES 414038SM Flow Ball Monitor, 40’ - 30” (Silver Mist) Rigid Toolbar 412304SM Flow Ball Monitor, 40’ - 20” (Silver Mist)
  • Page 146 — Parts 1400 NutriMax Liquid Applicator Flow Ball Components Please visit www.unverferth.com/parts/ for the most current parts listing. ITEM PART NUMBER DESCRIPTION QTY. NOTES 9003805 Velcro Hose Wrap, 4” (For 30”) 9005639 Flange Nut, 5/16-18 THD 9005640 Flange Nut, 3/8-16 THD (For 20”...
  • Page 147 — Parts 1400 NutriMax Liquid Applicator Notes Please visit www.unverferth.com/parts/ for the most current parts listing. 5-35...

  • Page 148: Coulter Mounting Components

    — Parts 1400 NutriMax Liquid Applicator Coulter Mounting Components Please visit www.unverferth.com/parts/ for the most current parts listing. 5-36...
  • Page 149 — Parts 1400 NutriMax Liquid Applicator Coulter Mounting Components Please visit www.unverferth.com/parts/ for the most current parts listing. RIGID 40’ FOLDING 40’ FOLDING 44’ TOOLBAR TOOLBAR TOOLBAR QTY BY SPACING PART ITEM DESCRIPTION NUMBER 414887B Coulter Mount Weldment =Black= Coulter Mount Weldment Offset...

  • Page 150: Coulter Post Assemblies

    — Parts 1400 NutriMax Liquid Applicator Coulter Post Assemblies Please visit www.unverferth.com/parts/ for the most current parts listing. NOTE: Refer to “Coulter Assembly, Blade & Depth Wheel” in this section for Parts Listing. 5-38...
  • Page 151 — Parts 1400 NutriMax Liquid Applicator Coulter Post Assemblies Please visit www.unverferth.com/parts/ for the most current parts listing. PART ITEM DESCRIPTION NOTES NUMBER QTY BY SPACING Coulter Post Vertical Assembly Includes Items 415742B Straight Post w/Mount Plate 1, 4 through 8B...

  • Page 152: Coulter Assembly, Blade & Depth Wheel

    — Parts 1400 NutriMax Liquid Applicator Coulter Assembly, Blade & Depth Wheel Please visit www.unverferth.com/parts/ for the most current parts listing. 5-40...
  • Page 153 — Parts 1400 NutriMax Liquid Applicator Coulter Assembly, Blade & Depth Wheel Please visit www.unverferth.com/parts/ for the most current parts listing. ITEM PART NUMBER DESCRIPTION NOTES Includes Items 1-46 Coulter Post Vertical Assembly Straight Post w/Mount Plate Refer to “Coulter Post...
  • Page 154 — Parts 1400 NutriMax Liquid Applicator Coulter Assembly, Blade & Depth Wheel Please visit www.unverferth.com/parts/ for the most current parts listing. ITEM PART NUMBER DESCRIPTION NOTES 9501438-056 Capscrew, 3/8”-16UNC x 1 1/4” Gr. 5 (Black) 9501439-032 Locknut 3/8”-16UNC (Black) 9501441-210 Roll Pin, 1/2”...
  • Page 155 — Parts 1400 NutriMax Liquid Applicator Notes Please visit www.unverferth.com/parts/ for the most current parts listing. 5-43...

  • Page 156: Add-On Coulter Packages

    — Parts 1400 NutriMax Liquid Applicator Add-On Coulter Packages Please visit www.unverferth.com/parts/ for the most current parts listing. 5-44...
  • Page 157 — Parts 1400 NutriMax Liquid Applicator Add-On Coulter Packages Please visit www.unverferth.com/parts/ for the most current parts listing. QTY. PART ITEM DESCRIPTION NOTES RIGID FOLDING FOLDING NUMBER 40’ Toolbar 40’ Toolbar 44’ Toolbar Add-On Coulter Package Includes Items 411892G (2 Coulters For 20” & 30” Rows) =GREEN=...

  • Page 158: Closer Wheel Assembly (Optional)

    — Parts 1400 NutriMax Liquid Applicator Closer Wheel Assembly & Components (Optional) Please visit www.unverferth.com/parts/ for the most current parts listing. 5-46...
  • Page 159 — Parts 1400 NutriMax Liquid Applicator Closer Wheel Assembly & Components (Optional) Please visit www.unverferth.com/parts/ for the most current parts listing. ITEM PART NUMBER DESCRIPTION NOTES Closer Wheel Assembly =Black= 69386B Includes All Items 69217B Closer Clearance Assembly =Black= Includes Items 3 - 13...

  • Page 160: Injector Nozzle And Injector Knives

    — Parts 1400 NutriMax Liquid Applicator Injector Nozzles and Injector Knives Please visit www.unverferth.com/parts/ for the most current parts listing. Single Injector Nozzle Dual Injector Nozzle Single Injector Knife Dual Injector Knife Smooth Blade Ripple Blade 5-48...
  • Page 161 — Parts 1400 NutriMax Liquid Applicator Injector Nozzles and Injector Knives Please visit www.unverferth.com/parts/ for the most current parts listing. ITEM PART NUMBER DESCRIPTION QTY. NOTES 412080B Single Nozzle Injector Assembly 9501439-036 Locknut 5/8-11UNC 68175B Injector Guard 68169B Clamp 9501438-126...
  • Page 162 — Parts 1400 NutriMax Liquid Applicator Injector Nozzles and Injector Knives (continued) Please visit www.unverferth.com/parts/ for the most current parts listing. QTY BY SPACING NOTES PART NUMBER OF ITEM DESCRIPTION NUMBER COULTERS PER TOOLBAR 30” 30” 36”/38” 20”/22” 414000 Nozzle Kit - #0004, 40’ Rigid Toolbar - 30” Spacing 412222 Nozzle Kit - #0004, 40’/44’...
  • Page 163 — Parts 1400 NutriMax Liquid Applicator Injector Nozzles and Injector Knives (continued) Please visit www.unverferth.com/parts/ for the most current parts listing. QTY BY SPACING NOTES PART NUMBER OF ITEM DESCRIPTION NUMBER COULTERS PER TOOLBAR 30” 30” 36”/38” 20”/22” 414005 Nozzle Kit - #0020, 40’ Rigid Toolbar - 30” Spacing 412227 Nozzle Kit - #0020, 40’/44’...
  • Page 164 — Parts 1400 NutriMax Liquid Applicator Injector Nozzles and Injector Knives (continued) Please visit www.unverferth.com/parts/ for the most current parts listing. QTY BY SPACING NOTES PART NUMBER OF ITEM DESCRIPTION NUMBER COULTERS PER TOOLBAR 30” 30” 36”/38” 20”/22” 414008 Orifice Kit - #57, 40’ Rigid Toolbar - 30” Spacing...
  • Page 165 — Parts 1400 NutriMax Liquid Applicator Injector Nozzles and Injector Knives (continued) Please visit www.unverferth.com/parts/ for the most current parts listing. QTY BY SPACING NOTES PART NUMBER OF ITEM DESCRIPTION NUMBER COULTERS PER TOOLBAR 30” 30” 36”/38” 20”/22” 414013 Orifice Kit - #125, 40’ Rigid Toolbar - 30” Spacing...

  • Page 166: Nozzle

    — Parts 1400 NutriMax Liquid Applicator Nozzle Please visit www.unverferth.com/parts/ for the most current parts listing. VENDOR: SPRAYING SYSTEMS VENDOR P/N: CP21953EPR FINISH: THIS DRAWING IS PROPERTY OF W W W W E E E E I I I I G G G G H H H H T T T T 0.0 lbmass...
  • Page 167 — Parts 1400 NutriMax Liquid Applicator Nozzle Please visit www.unverferth.com/parts/ for the most current parts listing. PART ITEM DESCRIPTION QTY. NOTES NUMBER 9007736 Quick Cap w/Gasket 9007735 Nozzle Cap Gasket TA865665 Hose Shank 1/4” ID x 1 3/8 TA800902 Hose Clamp for 3/8” Dia. Hose TA800910 Hose Clamp for 3/4”...

  • Page 168: Gauge Wheel Components

    — Parts 1400 NutriMax Liquid Applicator Gauge Wheel Components Please visit www.unverferth.com/parts/ for the most current parts listing. 5-56...
  • Page 169 — Parts 1400 NutriMax Liquid Applicator Gauge Wheel Components Please visit www.unverferth.com/parts/ for the most current parts listing. PART ITEM DESCRIPTION NOTES RIGID FOLDING NUMBER TOOLBAR TOOLBAR Beginning With Serial 410014B Gauge Wheel Assembly (Black) Number B36910100 Prior to Serial Number...

  • Page 170: Tank Fill Kit Raven Iso Only (Optional)

    — Parts 1400 NutriMax Liquid Applicator Tank Fill Kit Raven ISO Only (Optional) Please visit www.unverferth.com/parts/ for the most current parts listing. ITEM PART NUMBER DESCRIPTION NOTES 412471 Tank Fill Kit 9007195 Elbow, 3” Flange x 3” Flange 9007752 Raven ISO Tank Fill Kit TA816038 Gasket, 3”...
  • Page 171 — Parts 1400 NutriMax Liquid Applicator Notes Please visit www.unverferth.com/parts/ for the most current parts listing. 5-59...

  • Page 172: Undercarriage Plumbing Components

    — Parts 1400 NutriMax Liquid Applicator Undercarriage Plumbing Components Please visit www.unverferth.com/parts/ for the most current parts listing. ITEM PART NUMBER DESCRIPTION NOTES TA816042 Tank Flange 3" Manifold TA816041 Ball Valve Poly 3" Flange x 3" NPT Adapter TA816039 3" Flange Worm Screw Clamp TA816051 Tee 3"...
  • Page 173 — Parts 1400 NutriMax Liquid Applicator Undercarriage Plumbing Components Please visit www.unverferth.com/parts/ for the most current parts listing. ITEM PART NUMBER DESCRIPTION NOTES TA816022 Stubby Valve 2" Flange x 2" MPT TA811828 90° Elbow Poly Coupling 2" Male Adapter x 2" NPTF Female TA811500 Cap Coupler Poly 2"...
  • Page 174 — Parts 1400 NutriMax Liquid Applicator Inductor Plumbing Components - For SN B39050100 & Higher Please visit www.unverferth.com/parts/ for the most current parts listing. Remove Remove 5-62...
  • Page 175 — Parts 1400 NutriMax Liquid Applicator Inductor Plumbing Components - For SN B39050100 & Higher Please visit www.unverferth.com/parts/ for the most current parts listing. ITEM DESCRIPTION PART NO. NOTES Large Flange Nut 1/4-20UNC 97189 Decal, Agitation Control 9004361 Check Valve 1” Flange 9006665 Adapter 2”...

  • Page 176: Pump - Ace Hyd 750 Plumbing

    — Parts 1400 NutriMax Liquid Applicator Pump — ACE HYD 750 Plumbing Please visit www.unverferth.com/parts/ for the most current parts listing. Check Valve Arrow Direction INFLATION PROCEDURE: 1. TURN REGULATING VALVE ADJUSTING KNOB COUNTER CLOCKWISE UNTIL IT IS AT THE MINIMUM PRESSURE Routed To SETTING.
  • Page 177 — Parts 1400 NutriMax Liquid Applicator Pump — ACE HYD 750 Plumbing Please visit www.unverferth.com/parts/ for the most current parts listing. ITEM DESCRIPTION PART NO. QTY. NOTES Capscrew 3/8-16UNC x 1 1/4 9390-056 Grade 5 Gauge Tubing 1/4” Dia. TA720620 90°...

  • Page 178: Hydraulically Driven Centrifugal Pwm Pump - Hypro 9306C-Hm1C

    — Parts 1400 NutriMax Liquid Applicator Hydraulically Driven Centrifugal PWM Pump - HYPRO 9306C-HM1C Please visit www.unverferth.com/parts/ for the most current parts listing. 5-66...
  • Page 179 — Parts 1400 NutriMax Liquid Applicator Hydraulically Driven Centrifugal PWM Pump - HYPRO 9306C-HM1C Please visit www.unverferth.com/parts/ for the most current parts listing. ITEM PART NUMBER DESCRIPTION QTY. NOTES 9007141 Pump Complete, Hypro 9306C-HM1C Includes Items 1 thru 29 TA840300...

  • Page 180: Hydraulically Driven Centrifugal Pwm Pump - (Ace 755) (Ss)

    — Parts 1400 NutriMax Liquid Applicator Hydraulically Driven Centrifugal PWM Pump - (ACE 755) (SS) Please visit www.unverferth.com/parts/ for the most current parts listing. 5-68...
  • Page 181 — Parts 1400 NutriMax Liquid Applicator Hydraulically Driven Centrifugal PWM Pump - (ACE 755) (SS) Please visit www.unverferth.com/parts/ for the most current parts listing. ITEM DESCRIPTION PART NO. QTY. NOTES PWM Pump, 755 Stainless Steel 9008739 Pump Seal Repair Kit...

  • Page 182: Hydraulically Driven Centrifugal Pwm Pump - (Ace 750)

    — Parts 1400 NutriMax Liquid Applicator Hydraulically Driven Centrifugal PWM Pump - (ACE 750) Please visit www.unverferth.com/parts/ for the most current parts listing. 5-70...
  • Page 183 — Parts 1400 NutriMax Liquid Applicator Hydraulically Driven Centrifugal PWM Pump - (ACE 750) Please visit www.unverferth.com/parts/ for the most current parts listing. ITEM DESCRIPTION PART NO. QTY. NOTES PWM Pump, 750 9008132 750 Pump Seal Repair Kit 9005519 Includes Items 2, 8, and 16...

  • Page 184: Hydraulically Driven Centrifugal Pump - Ace Hyd 750

    — Parts 1400 NutriMax Liquid Applicator Hydraulically Driven Centrifugal Pump - ACE HYD 750 Please visit www.unverferth.com/parts/ for the most current parts listing. 35 42 23 18 21 22 36 42 5-72...
  • Page 185 — Parts 1400 NutriMax Liquid Applicator Hydraulically Driven Centrifugal Pump - ACE HYD 750 Please visit www.unverferth.com/parts/ for the most current parts listing. ITEM PART NUMBER DESCRIPTION QTY. NOTES 9005840 Pump, 750 9005502 Volute, 300 x 220 Flange 9005503 O-Ring...

  • Page 186: Hydraulically Driven Centrifugal Pwm Pump - Fmcsc 205F Hyd 304

    — Parts 1400 NutriMax Liquid Applicator Hydraulically Driven Centrifugal PWM Pump - FMCSC 205F HYD 304 Please visit www.unverferth.com/parts/ for the most current parts listing. 5-74...
  • Page 187 — Parts 1400 NutriMax Liquid Applicator Hydraulically Driven Centrifugal PWM Pump - FMCSC 205F HYD 304 Please visit www.unverferth.com/parts/ for the most current parts listing. PART ITEM DESCRIPTION QTY. NOTES NUMBER 9007100 Pump Complete, ACE FMCSC-205-HYD-304 Includes Items 1 thru 22...

  • Page 188: Hydraulically Driven Centrifugal Pwm Pump - Ace 205 Pwm (Ss)

    — Parts 1400 NutriMax Liquid Applicator Hydraulically Driven Centrifugal PWM Pump - ACE 205 PWM (SS) Please visit www.unverferth.com/parts/ for the most current parts listing. 5-76...
  • Page 189 — Parts 1400 NutriMax Liquid Applicator Hydraulically Driven Centrifugal PWM Pump - ACE 205 PWM (SS) Please visit www.unverferth.com/parts/ for the most current parts listing. PART ITEM DESCRIPTION QTY. NOTES NUMBER 9007431 Pump Complete, ACE FMCSC-205-HYD-304 Includes Items 1 thru 22 TA826325 Pipe Plug 1/8”...

  • Page 190: Hydraulic Valve Block Applicator Assembly Components

    — Parts 1400 NutriMax Liquid Applicator Hydraulic Valve Block Applicator Assembly Components Please visit www.unverferth.com/parts/ for the most current parts listing. Face with Port SEQ2 Face with Port SEQ1 Face with Port SEQ2 Face with Port SEQ1 5-78...
  • Page 191 — Parts 1400 NutriMax Liquid Applicator Hydraulic Valve Block Applicator Assembly Components Please visit www.unverferth.com/parts/ for the most current parts listing. QTY. PART ITEM DESCRIPTION NOTES RIGID FOLDING NUMBER TOOLBAR TOOLBAR 412446 Hydraulic Valve Block Applicator Assembly Includes Items 1 through 17...

  • Page 192: Hydraulic Components (Except Hydraulic Hoses)

    — Parts 1400 NutriMax Liquid Applicator Hydraulic Components (Except Hydraulic Hoses) Please visit www.unverferth.com/parts/ for the most current parts listing. PART RIGID FOLDING ITEM DESCRIPTION NOTES NUMBER TOOLBAR TOOLBAR 411740B Plate, Cylinder Anti-Rotation Applicator Valve Block Assembly 412459B Gauge Mount Weldment =BLACK=...
  • Page 193 — Parts 1400 NutriMax Liquid Applicator Hydraulic Components (Except Hydraulic Hoses) Please visit www.unverferth.com/parts/ for the most current parts listing. PART RIGID FOLDING ITEM DESCRIPTION NOTES NUMBER TOOLBAR TOOLBAR 9004660 Hydraulic Cylinder 3" x 16" 9004382 Seal Kit 9005305 Lynch Pin 3/8” Dia. x 3”...

  • Page 194: Hydraulic Hoses To Tractor & Toolbar Down Pressure Gauge

    — Parts 1400 NutriMax Liquid Applicator Hydraulic Hoses to Tractor & Toolbar Down Pressure Gauge Please visit www.unverferth.com/parts/ for the most current parts listing. 5-82...
  • Page 195 — Parts 1400 NutriMax Liquid Applicator Hydraulic Hoses to Tractor & Toolbar Down Pressure Gauge Please visit www.unverferth.com/parts/ for the most current parts listing. PART ITEM DESCRIPTION NOTES RIGID FOLDING NUMBER TOOLBAR TOOLBAR Hydraulic Hose 1/4” x 14” 9004112 9/16-18 JIC Female x 9/16-18 JIC 90° Female Short Drop 9006172 90°...

  • Page 196: Hydraulic Hoses To Toolbar Lift Cylinders

    — Parts 1400 NutriMax Liquid Applicator Hydraulic Hoses to Toolbar Lift Cylinders Please visit www.unverferth.com/parts/ for the most current parts listing. ITEM PART NUMBER DESCRIPTION RIGID & FOLDING TOOLBARS 9007659 Hydraulic Block Valve Assembly 95811 90° Elbow 3/4-16 O-Ring Male x 3/4-16 JIC Female Swivel Nut 88685 In-Line Check Valve with 0.078 Restrictor...
  • Page 197 — Parts 1400 NutriMax Liquid Applicator Notes Please visit www.unverferth.com/parts/ for the most current parts listing. 5-85...

  • Page 198: Hydraulic Hoses To Main Wing & Wing Tilt Cylinders

    — Parts 1400 NutriMax Liquid Applicator Hydraulic Hoses to Main Wing & Wing Tilt Cylinders Please visit www.unverferth.com/parts/ for the most current parts listing. 5-86...

  • Page 199: Hydraulic Hoses To Toolbar Latch Cylinder

    — Parts 1400 NutriMax Liquid Applicator Hydraulic Hoses to Main Wing & Wing Tilt Cylinders Please visit www.unverferth.com/parts/ for the most current parts listing. ITEM PART NUMBER DESCRIPTION RIGID & FOLDING TOOLBARS 9007659 Hydraulic Block Valve Assembly 9006164 Tee 9/16-18 JIC Male x 9/16-18 JIC Male x 9/16-18 JIC Male...
  • Page 200 — Parts 1400 NutriMax Liquid Applicator Hydraulic Hoses to Outer Wing Cylinders Beginning with Serial Number B36910100 Please visit www.unverferth.com/parts/ for the most current parts listing. ITEM PART NUMBER DESCRIPTION FOLDING TOOLBARS ONLY 9007659 Hydraulic Block Valve Assembly 9001710 Tee 9/16-18 JIC Male x 9/16-18 JIC Male x 9/16-18 O-Ring Male...
  • Page 201 — Parts 1400 NutriMax Liquid Applicator Hydraulic Hoses to Outer Wing Cylinders Prior to Serial Number B36910100 Please visit www.unverferth.com/parts/ for the most current parts listing. ITEM PART NUMBER DESCRIPTION FOLDING TOOLBARS ONLY 9007659 Hydraulic Block Valve Assembly 9001710 Tee 9/16-18 JIC Male x 9/16-18 JIC Male x 9/16-18 O-Ring Male...

  • Page 202: Main Electrical Components

    — Parts 1400 NutriMax Liquid Applicator Main Electrical Components Please visit www.unverferth.com/parts/ for the most current parts listing. Work Light Right-Hand Left-Hand Amber Light Amber Light Right-Hand Left-Hand Red Light Red Light 5-90...
  • Page 203 — Parts 1400 NutriMax Liquid Applicator Main Electrical Components Please visit www.unverferth.com/parts/ for the most current parts listing. ITEM PART NUMBER DESCRIPTION NOTES 252303B Bracket-Light, RH 252304B Bracket-Light, LH 268678B Plate-Light Guard 411148G Mount Bracket Weldment =GREEN= 411148R Mount Bracket Weldment =RED=...

  • Page 204: Console Electrical Components

    — Parts 1400 NutriMax Liquid Applicator Console Electrical Components Please visit www.unverferth.com/parts/ for the most current parts listing. 5-92...
  • Page 205 — Parts 1400 NutriMax Liquid Applicator Console Electrical Components Please visit www.unverferth.com/parts/ for the most current parts listing. ITEM PART NUMBER DESCRIPTION NOTES 9006743 John Deere ISO to Raven ISO Adapter Cable 9006744 Raven ISO to ISO Terminator Cable 9005921...

  • Page 206: Rate Control Module (Rcm) Electrical Components

    — Parts 1400 NutriMax Liquid Applicator Rate Control Module (RCM) Electrical Components Please visit www.unverferth.com/parts/ for the most current parts listing. FUSE CABLE, 12' ADAPTER 115-7302-020 (ONLY REQUIRED FOR PWM PUMP) TRACTOR IBBC SECTION 1 MASTER SECTION 2 SWITCH FUSE...

  • Page 207: Rate Control Module (Rcm) Electrical Components

    — Parts 1400 NutriMax Liquid Applicator Rate Control Module (RCM) Electrical Components Please visit www.unverferth.com/parts/ for the most current parts listing. 5-95...
  • Page 208 — Parts 1400 NutriMax Liquid Applicator Rate Control Module (RCM) Electrical Components Please visit www.unverferth.com/parts/ for the most current parts listing. ITEM PART NUMBER DESCRIPTION QTY. NOTES 415120B Node Mount Plate =Black= 9000106 Cable Tie (Not Shown) 9005916 Foot Switch ISO Note w/Harness...
  • Page 209 — Parts 1400 NutriMax Liquid Applicator Notes Please visit www.unverferth.com/parts/ for the most current parts listing. 5-97...
  • Page 210 MANUALS\\412375///November 2016-0//March 2017-1//October 2017-2//January 2019-3//March 2019-4//September 2019-5//March 2020-6//December 2020-7//March 2021-8//November 2021-9//August 2022-10...

Table of Contents