Table of Contents
Related Manuals for SEW-Eurodrive MOVIMOT MM11C Series
Summarization of Contents
General Information
Structure of Safety Notes
Explains signal words and safety note structures.
Warranty, Liability, Copyright, Trademarks
Covers warranty claims, liability exclusion, copyright, and trademarks.
Other Applicable Documentation
Refers to detailed operating instructions and qualified personnel.
Determine Required Retrofit Set
Guide to identifying the correct retrofit set using nameplate data.
Mechanical Installation
Scope of Delivery of Retrofit Set
Lists the components included in the MOVIMOT® MM..D retrofit set.
Disassembly MOVIMOT® MM..C
Steps for safely removing the MOVIMOT® MM..C inverter.
Disassembly MOVIMOT® MM..C
Continues disassembly instructions for the MOVIMOT® MM..C.
Assembly MOVIMOT® MM..D
Steps 1 & 2 for installing the new MOVIMOT® MM..D and connection box.
Assembly MOVIMOT® MM..D
Steps 3-6 for connecting cables and brake motors during assembly.
Assembly MOVIMOT® MM..D
Steps 7-9 for installing braking resistor and mounting inverter.
Startup
Important Notes on Startup
Critical safety warnings and precautions before starting the drive.
Control Element Settings
Configuration of setpoint potentiometer (f1) and switches (f2, t1).
Setting DIP Switches
Setting the DIP switches (S3, S4, S1, S2) for the new inverter.
DIP Switch S1 and S2 Functions
Details DIP switch S1 and S2 functions and settings.
Setting 24 V Supply via Switch S5
Setting the 24 V supply via switch S5.
Starting Up with AS-Interface
Initial steps for starting up the drive with AS-Interface option.
Assigning Slave Address
Assigning the slave address using a hand-held programming device.
AS-interface MLK30A Binary Slave
Details AS-interface MLK30A binary slave configuration.
AS-Interface Data Transfer
Explains data transfer between AS-Interface master and MOVIMOT®.
Setpoint Scaling and Inverter Behavior
Covers setpoint scaling and inverter behavior based on AS-Interface bits.
Need help?
Do you have a question about the MOVIMOT MM11C Series and is the answer not in the manual?
Questions and answers