Advertisement
Quick Links
GENERAL ASSEMBLY
ATENA | FIERA
IMAGE 1, Example walls AT2 and AT4
PLEASE NOTE:
CAUTION! Follow the specifications carefully when fitting wall units.
Secure any elements that may tip with the anti-tip mechanisms supplied.
GENERAL ATENA | FIERA ASSEMBLY
Qualified pecialist personnel
1
Advertisement
Related Manuals for GWINNER FIERA
Summarization of Contents
Wall Unit Drilling and Installation Dimensions
Angled Shelves with Glass Shelves
Drilling and installation dimensions for angled shelves and glass shelf wall panels.
HK3 Wall Units
Drilling and installation dimensions for HK3 series wall units of various widths.
H2 & H6 Wall Units
Drilling and installation dimensions for H2 and H6 series wall units.
H8 Wall Units
Drilling and installation dimensions for H8 series wall units.
Drawer Organiser Assembly
Drawer Organiser Construction
Steps for assembling drawer organizers, including clip insertion and profile arrangement.
Adjusting Front Gap with Magnets
Method for adjusting the front gap of doors and flaps using magnets and a screwdriver.
Handle and Hinge Adjustments
Handle Attachment
Instructions for attaching handles to doors, drawers, and flaps.
Door Alignment via Hinges
Guidance on aligning doors vertically and horizontally using hinge adjustment screws.
Drawer Height Fine-Tuning
Method for fine-tuning the vertical position of drawers.
LED Lighting Plans
Lighting Plan without Remote Control
Details on LED lighting components, wiring, and power for systems without radio remote control.
Lighting Plan with FKS4 Remote Control
Information on LED lighting systems compatible with FKS4 radio remote control, including specifications.
Need help?
Do you have a question about the FIERA and is the answer not in the manual?
Questions and answers