Adding/Editing A Comment To An Existing Storage Array; Removing Storage Arrays - Dell PowerVault MD3220 Owner's Manual

Adding/Editing a Comment to an Existing Storage Array

A descriptive comment, with an applicable storage array name, is a helpful
identification tool. You can add or edit a comment for a storage array in the
EMW only.
To add or edit a comment:
1 In the EMW, select the Devices tab and select the relevant managed
storage array.
2 Select Edit Comment.
The Edit Comment dialog is displayed.
3 Type the 60-character comment.
4 Click OK.
This option updates the comment in the table view and saves it in your local
storage management station file system. The comment does not appear to
administrators who are using other storage management stations.

Removing Storage Arrays

You can remove a storage array from the list of managed arrays if you no
longer want to manage it from a specific storage management station.
Removing a storage array does not affect the storage array or its data in any
way. Removing a storage array simply removes it from the list of storage arrays
that appear in the drop-down list in the Array Selector. If a storage array is
accidentally removed, it can be added again. See "Adding Storage Arrays" on
page 64.
You can remove the storage array only from the EMW.
To remove the storage array:
1 In the EMW, select the Devices tab and select the relevant managed
storage array.
2 Select Edit Remove Storage Array.
A message prompts you for a confirmation for the removal of the selected
storage array.
3 To remove the storage array, click Yes.
Configuration: About Your Storage Array
71