Automatically Collect The Support Bundle Data - Dell PowerVault MD3220 Owner's Manual

2 Enter a name for the support data file in Specify filename or click Browse
to navigate to a previously saved file to overwrite an existing file.
The suffix .zip is added automatically to the file if you do not specify a
suffix for the file.
3 Enter the Execution summary.
4 Click Start.
After all of the support files have been gathered, they are archived using
the file name that you specified.
5 Click OK.

Automatically Collect the Support Bundle Data

You can use the Collect Support Bundle option to automatically save a copy
of the support bundle when the client monitor process detects a critical
event.
During a critical event, the support bundle is saved to the local physical disk
of the client system in the same area that is used for other recovery
information. This information is not overwritten for at least 72 hours.
WARNING:
representative.
To automatically collect the support bundle data:
1 In the AMW, select Advanced Troubleshooting Support Data
Automatic Settings.
2 Select Automatically collect support data for critical events.
3 To change the location of the saved support bundle, click Change.
The Change Folder Location window is displayed, navigate to the relevant
folder and click OK.
4 To reset the default location, click Reset.
5 Click OK.
Use this option only under the guidance of your Technical Support
Troubleshooting: Your Storage Array Software
221