5 In Advanced virtual disk parameters, you can select:
•
Use recommended settings.
Customize settings.
•
6 Click Next.
7 In the Customize Advanced Virtual Disk Parameters window, select the
appropriate Virtual Disk I/O characteristics type. You can select:
•
File system (typical)
•
Database
•
Multimedia
•
Custom
NOTE:
8 Select the appropriate Preferred RAID controller module ownership and
click Next.
The Specify Virtual Disk-to-LUN Mapping window is displayed.
9 In the Specify Virtual Disk-to-LUN Mapping window, you can select:
•
Default Mapping
The appropriate Host type
•
Map later Using Mappings View.
•
10 Click Finish.
The virtual disks are created.
Changing the Virtual Disk Modification Priority
You can specify the modification priority setting for a single virtual disk or
multiple virtual disks on a storage array.
Guidelines to change the modification priority of a virtual disk:
•
If more than one virtual disk is selected, the modification priority defaults
to the lowest priority. The current priority is shown only if a single virtual
disk is selected.
•
Changing the modification priority by using this option modifies the
priority for the selected virtual disks.
98
Configuration: Disk Groups and Virtual Disks
If you select Custom, you must select an appropriate segment size.