Installing the Backplane
1 Align the holes on the backplane with the holes on the array.
2 Tighten the captive screw to secure the backplane to the chassis.
See Figure 15-16 for PowerVault MD3200 or Figure 15-17 for
PowerVault MD3220.
3 Replace the screws that secure the backplane to the chassis.
See Figure 15-16 for PowerVault MD3200 or Figure 15-17 for
PowerVault MD3220.
4 Align the slots on the RAID controller module /power supply cage with the
tabs on the chassis. See Figure 15-15.
5 Push the RAID controller module /power supply cage toward the front of
the array.
6 Replace the screws that secure the RAID controller module /power supply
cage to the chassis.
7 Replace the control panel. See "Installing the Control Panel" on page 208.
8 Replace the power supply/cooling fan modules. See "Installing a Power
Supply/Cooling Fan Module" on page 205.
9 Replace the hard drives. See "Installing a Hard Drive" on page 194.
10 Connect all the cables to the array.
11 Turn on the array and the host server.
212
Management: Installing Array Components