Control Panel; Removing The Control Panel - Dell PowerVault MD3220 Owner's Manual

2 Connect the power cable to the power supply/cooling fan module and plug
the cable into a power outlet.
3 Secure the power cable using the Velcro strap. See Figure 15-12.
Figure 15-12. Securing the Power Cable
1
Velcro strap
CAUTION:
strap.
NOTE:
If the array is powered on, all the power supply LEDs remain off until the AC
power cable is connected to the power supply/cooling fan module and the power
switch is turned on.
4 Turn on the power supply/cooling fan module.

Control Panel

Removing the Control Panel

1 Turn off the array and host server.
2 Disconnect all the power cables connected to the array.
206
Management: Installing Array Components
When connecting the power cable, secure the cable with the Velcro
1