Figure 3-6. Replacing the Power Supply
1
power supply
4
on/off switch
CAUTION:
The power supply/cooling fan modules are heavy. Use both hands
when removing.
3 Grasp the handle on the power supply and carefully pull the module out of
the bay (see Figure 3-6).
NOTICE:
The power-supply handle is provided to ease the task of pulling the
module from the bay. Do not use this handle to carry the module.
Installing a Power Supply/Cooling Fan Module
1 Carefully slide the new power supply/cooling fan module approximately
two-thirds of the way into the empty bay.
1
2
captive screws (2)
Installing Enclosure Components
2
3
handle
4
3
65