Host Types; Snapshot Virtual Disks - Dell PowerVault MD3000i Hardware Owner's Manual

You can manually configure a host server-to-virtual disk mapping. When you
configure host server-to-virtual disk mapping, consider these guidelines:
• You can define one host server-to-virtual disk mapping for each virtual disk
in the storage array.
• Host server-to-virtual disk mappings are shared between RAID controller
modules in the storage array.
• A unique LUN must be used by a host group or host server to access a
virtual disk.
• Not every operating system will have the same number of LUNs available
for use.

Host Types

Generally, a host server is a server that accesses a storage array. Host servers
are mapped to the virtual disks and use one or more iSCSI initiator ports. In
general, host servers have the following attributes:
• Host name — A name that uniquely identifies the host server.
• Host group (used in Cluster solutions only) — Two or more host servers
associated together to share access to the same virtual disks.
A host group is a group of two or more host servers that share access to
specific virtual disks on the storage array. This host group is a logical entity
you can create in MD Storage Manager. All host servers in a host group
must be running the same operating system.
• Host type — The operating system running on the host server.

Snapshot Virtual Disks

A snapshot is a point-in-time image of a virtual disk. The snapshot provides
an image of the virtual disk at the time the snapshot was created. Typically,
you create a snapshot so that an application (for example, a backup
application) can access the snapshot and read the data while the source
virtual disk remains online and user-accessible. When the backup is
completed, the snapshot virtual disk is no longer needed. You can create up to
four snapshots per virtual disk.
44
Using Your RAID Enclosure