Dell PowerVault MD3000i Hardware Owner's Manual page 21

Table 1-4. RAID Controller Module Component Functions (continued)
Item Component
4 iSCSI In Port 1 Link
Speed/Activity
Status LED
5 Battery Fault LED
(amber)
6 Cache Active LED
(green)
7 iSCSI In Port 1
8 iSCSI In Port 1 Link
Duplex Mode
9 Controller Fault
LED (amber)
10 Controller Power
LED (green)
11 Ethernet Link LED
(green)
12 Management Port
Ethernet Connector
Icon Function
Green: Link is operating at 1000 Mbps.
Amber: Link is operating at 100 Mbps.
Off: iSCSI connection is not active.
Amber: Battery backup unit or battery has
failed or is missing.
Off: Battery backup unit and battery is
operating normally.
Green: On-board controller memory
contains data.
Off: On-board controller memory is empty.
In-1 Provide host-to-controller iSCSI
connection. If LED is solid, there is no
activity on the link. If the LED is blinking,
there is activity on the link.
Green: Full-duplex mode.
Off: Half-duplex mode.
NOTE:
the link speed is 100Mbps.
Amber: Controller fault detected.
Off: Controller is operating normally.
Green: Controller power is on.
Off: Controller is not powered.
Green: Ethernet connection is active.
Off: Ethernet connection is not active.
Provide a 10/100 Mbps Ethernet
connection for out-of-band management of
the enclosure.
Half-duplex mode is supported only if
About Your System
21