Download Print this page
Elite Screens Evanesce T B ETB110HW2-E8 User Manual

Elite Screens Evanesce T B ETB110HW2-E8 User Manual

In-ceiling electric motorized front projection screen

Advertisement

Quick Links

In-Ceiling Electric Motorized Front Projection Screen
Evanesce Tab-Tension B Series
Important Safety & Warning Precautions
Make sure to read this user's guide and follow the procedures below.
Caution: The screen's Black Top Drop is already set to its maximum drop distance. There is NO extra
Black Top Drop in the roller. Please be aware of this as it will void your warranty with Elite Screens.
Unapproved changes or modifications (except for cutting the power cord for hardwire installations) to this
unit are prohibited and will void your warranty.
Please retain this user's guide for future reference.
To avoid damaging the unit, do not use with any unauthorized accessories not recommended by
the manufacturer.
Handle the unit carefully during transportation to avoid any damages.
To ensure safe and reliable operation, direct connection to a properly grounded power source is
advised.
The power outlet supplying power to the unit should be close to the unit and easily accessible.
Do not install the unit on uneven, inclined surfaces;
Do not install in damp places to avoid an electric shock or short circuit.
Do not place any heavy objects over the power cord.
Position the power cord properly to avoid creating a trip obstacle.
To avoid an electrical shock or fire, due to a loose contact or short circuit, do not overload the
power cord.
The internal & external parts of this unit are not end user serviceable. Do not attempt to
disassemble this unit by yourself. No one except authorized technicians can open and make
repairs to this unit.
Make sure the power source that this unit is connected to has a continuous power flow.
If there is need to use an extension cord, make sure the cord has an equal rating as the appliance
to avoid over heat.
Do not handle the power plug when your hands are wet or your feet are in contact with water.
Properly dispose of this equipment according to the environmental regulations in your area
when product is no longer of service.
Rev.071916-MZ
User's Guide
1
www.elitescreens.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the Evanesce T B ETB110HW2-E8 and is the answer not in the manual?

Questions and answers

Summarization of Contents

Important Safety & Warning Precautions
General Safety Guidelines
Follow safety instructions for safe operation, handling, power, and maintenance.
Black Top Drop & Warranty Warning
Warning regarding the maximum drop distance of the screen's Black Top Drop and warranty voiding.
Installation Safety & FCC Compliance
Usage Restrictions and Warnings
Avoid using the unit during adverse weather, high temperatures, or in hazardous environments.
Professional Installation & Modifications
Consult professionals for installation safety and avoid unauthorized product modifications.
FCC Class B Compliance & Interference
Details on Class B digital device compliance and methods to mitigate radio frequency interference.
Pre-Installation Handling Guidelines
Unpack and handle the screen carefully on a clean, level surface to prevent damage and stains.
Evanesce Tab-Tension Controls & Accessories
Accessory Identification Guide
Identifies various accessories including IR/RF remotes, control boxes, cables, and batteries.
Screen Power and Basic Operation
Information on regional voltage requirements and initial steps for operating the screen.
Six Methods for Screen Control
Details the six different methods available to control the Evanesce Tab-Tension screen's movement.
Advanced Control Features
5-12 Volt Trigger Synchronization
Explains the 5-12V trigger input for synchronizing screen drop/rise with projector power cycles.
Wireless 5-12V Trigger Setup Guide
Step-by-step instructions for programming the wireless 5-12V trigger for synchronized projector operation.
Hardware Parts List for Installation
Comprehensive list of all necessary hardware parts required for the screen installation, with quantities.
Installation Instructions - Power & Above Ceiling
Power Connection Requirements
Wiring information for 110V and 220V power connections, including hardwire recommendations.
Above Ceiling Mount Assembly
Steps for assembling the screen mounting hardware, including brackets and suspension bars, for above ceiling installation.
Optional Mounting Configurations
Suspension Bar J-Hook Installation
Instructions for attaching the optional J-Hook to suspension bars and hanging brackets for flexible mounting.
External Ceiling Mount Preparation
Guide for measuring and preparing ceiling attachment points for optional external mounting hardware.
Ceiling Installation Procedures
Ceiling Mount Point Securing
Steps for marking and securing the appropriate mounting points in the ceiling for the screen assembly.
Below Ceiling Installation Space Prep
Instructions for measuring and cutting the ceiling space according to screen dimensions for below ceiling installation.
Ceiling Mounting Fastening
Ceiling Hole Drilling Guide
Guide on drilling the correct hole locations in the ceiling corresponding to screen casing attachment points.
Expanding Bolt & Screw Installation
Instructions for mounting expanding bolts and tightening hexagonal screws to ensure secure screen support.
Finalizing Installation & Support
Screen Assembly to Ceiling Attachment
Steps for attaching the screen assembly to the ceiling, ensuring a firm and secure connection.
Installation Completion & Contact Info
Instructions for installing the cover panel, and contact details for technical support.