Detailed Installation - Intel SRCU41L - RAID Controller User Manual

Hardware Installation
6. Turn power on after completing the safety check.
2.3

Detailed Installation

This section provides detailed instructions for installing a Intel
1. Unpack the Storage Adapter
Unpack and remove the Intel
damaged, or if any items listed below are missing, contact your Intel support representative.
The Intel
— the Intel
systems, an electronic version of this Hardware and Software User Guide, and other
related documentation.
— a license agreement
2. (Optional, required to enable Write Back Cache) Attach Battery Backup Unit (BBU) to the
adapter.
a. Remove the Battery Backup Unit from its packaging.
b. Connect the wire from the battery to the circuit board. (A)
c. Position the BBU over the RAID adapter so the connectors line up (B). Press the BBU onto
the adapter.
d. Turn the adapter over.
e. Using three screws (C), secure the BBU to the RAID adapter.
6
®
Raid Controller SRCU41L. Inspect it for damage. If it appears
®
Raid Controller SRCU41L is shipped with
®
SRCU41L Raid Controller CD, which contains drivers for supported operating
®
Raid Controller SRCU41L.
®
Intel SRCU41L Raid Controller User Manual