Intel SRCU41L - RAID Controller User Manual page 9

Preface
This guide is the hardware reference and user's guide for the Intel
contains complete installation instructions and specifications .
For information about how to configure the SRCU41L, and for an overview of the software drivers, see
the Intel RAID Software User's Guide.
Audience
This document assumes that you have some familiarity with RAID controllers and related support
devices. The people who benefit from this book are:
•
Engineers who are designing an SRCU41L into a system
•
Anyone installing an SRCU41L in their RAID system
Related Publications
®
Intel RAID Software User's Guide on the Resource CD included with the RAID controller.
Safety Instructions
Use the following safety guidelines to help protect your computer system from potential damage and
to ensure your own personal safety.
When Using Your Computer System
As you use your computer system, observe the following safety guidelines:
CAUTION: Do not operate your computer system with any cover(s) (such as computer covers, bezels,
filler brackets, and front-panel inserts) removed:
•
To help avoid damaging your computer, be sure the voltage selection switch on the power supply is
set to match the alternating current (AC) power available at your location:
– 115 volts (V)/60 hertz (Hz) in most of North and South America and some Far Eastern countries
such as Japan, South Korea, and Taiwan
– 230 V/50 Hz in most of Europe, the Middle East, and the Far East. Also be sure your monitor
and attached peripherals are electrically rated to operate with the AC power available in your
location.
•
To help avoid possible damage to the system board, wait five seconds after turning off the system
before removing a component from the system board or disconnecting a peripheral device from the
computer.
®
Intel Raid Controller SRCU41L User Manual
®
RAID Controller SRCU41L. It
ix