MACROMEDIA FLASH 8-EXTENDING FLASH Manual page 473

timeline.clearKeyframes()
Availability
Flash MX 2004.
Usage
timeline.clearKeyframes([startFrameIndex [, endFrameIndex]])
Parameters
A zero-based index that defines the beginning of the range of frames to
startFrameIndex
clear. If you omit , the method uses the current selection. This parameter is
startFrameIndex
optional.
A zero-based index that defines the end of the range of frames to clear. The
endFrameIndex
range goes up to, but does not include, . If you specify only
endFrameIndex
, defaults to the value of . This
startFrameIndex endFrameIndex startFrameIndex
parameter is optional.
Returns
Nothing.
Description
Method; converts a keyframe to a regular frame and deletes its contents on the current layer.
Example
The following example clears the keyframes from Frame 5 up to, but not including, Frame 10
(remember that index values are different from frame number values):
fl.getDocumentDOM().getTimeline().clearKeyframes(4, 9);
The following example clears the keyframe at Frame 15 and converts it to a regular frame:
fl.getDocumentDOM().getTimeline().clearKeyframes(14);
timeline.convertToBlankKeyframes()
Availability
Flash MX 2004.
Usage
timeline.convertToBlankKeyframes([startFrameIndex [, endFrameIndex]])
Timeline object 473