MACROMEDIA FLASH 8-EXTENDING FLASH Manual page 21

To remove the earlier version of the PolyStar.jsfl file that was installed with
Flash:
1.
Select Edit > Customize Tools Panel (Windows) or Flash > Customize Tools Panel
(Macintosh).
2.
In the Customize Tools Panel dialog box, click the Rectangle tool on the left side of the
dialog box.
The Rectangle tool and the PolyStar tool should now be listed in the Current Selection list
on the right side of the dialog box.
3.
Select the PolyStar tool in the Current Selection list.
4.
Click Remove.
5.
Click OK.
6. Quit Flash.
7. Remove only the PolyStar.jsfl file from the Configuration/Tools folder (see
files" on page 7).The PolyStar.xml and PolyStar.png files are needed by the new
PolyStar.jsfl file that you will install later. When you restart Flash, the PolyStar tool no
longer appears in the Customize Tools Panel dialog box.
To install the updated PolyStar example files:
1. If Flash is running, exit the application.
2. Copy the new PolyStar.jsfl file to the Configuration/Tools folder (see
on page 7). The PolyStar.xml and PolyStar.png files that you see in this folder are needed
by the new PolyStar.jsfl file.
3.
Restart Flash.
4.
Select Edit > Customize Tools Panel (Windows) or Flash > Customize Tools Panel
(Macintosh). You should see PolyStar tool in the available tools list.
5.
Click the Rectangle tool at the left side of the Customize Tools Panel dialog box. The
Rectangle Tool should appear in the Current Selection list at the right side of the
dialog box.
6.
Select the PolyStar tool from the Available Tools list.
7.
Click Add.
8.
Click OK.
The PolyStar tool now appears in the Rectangle tool pop-up menu.
"Saving JSFL
"Saving JSFL files"
Sample implementations 21