MACROMEDIA DIRECTOR MX 2004-GETTING STARTED WITH DIRECTOR Getting Started page 34

To move a panel to a different panel group:
Select a stand-alone panel or a panel within a panel group.
1
From the Options menu, select Group [panel name] With, where [panel name] is the name of
2
the panel that you selected.
Note: If Group [panel name] With is not available on the Options menu, then the panel cannot be
moved to a new panel group.
From the Group [panel name] With menu, do one of the following:
3
To move the panel to an existing tabbed panel group, select a panel group name.
To move the panel to a new standalone panel, select New Panel Group.
Note: The New Panel Group option is dimmed if the panel is already a stand-alone panel.
To rename a panel group:
From a panel group's Options menu, select Rename Panel Group.
1
In the Rename Panel Group dialog box, enter a new name for the panel group, and click OK.
2
To rearrange the order of tabs within a panel group:
Select a tab within a panel group.
1
From the panel group's Options menu, select Group [panel name] With, where [panel name]
2
is the name of the tab that is selected.
From the Group [panel name] With menu, select the same panel group that already contains
3
the tab.
The tab is moved to the last (rightmost) position in the panel group.
Tip: When you customize your panel groups, it is a good idea to save your new layout for later use.
See "Docking panel groups" on page
34 Chapter 3: Getting to Know the Workspace
35.