MACROMEDIA COLDFUSION STUDIO 5-USING COLDFUSION 5 STUDIO Use Manual page 30

12
To delete a browser from the list:
1 Select Options > Configure External Browsers to open the External Browsers
dialog box, if it is not already open.
2 Click the browser to remove from the list and click Delete.
3 Click Yes in the message that appears to confirm that you want to delete it.
4 Click OK to save your changes and close the External Browsers dialog box.
To change the default browser:
1 Select Options > Configure External Browsers to open the External Browsers
dialog box, if it is not already open.
2 Select the appropriate browser and click the up arrow button until it is at the top
of the list. The default browser always appears at the top of the list.
3 Click OK to save your changes and close the External Browsers dialog box.
To set browsers' file saving behavior:
1 Select Options > Configure External Browsers to open the External Browsers
dialog box, if it is not already open.
2 Choose one of the following options for handling a document when opening it in
an external browser:
3 Click OK to save your changes and close the External Browsers dialog box.
Note
If you selected the internal browser option to Use External Browser Configuration for
Internal Browser, then the file save behavior you specify here applies to the internal
browser too.
To view pages in an external browser, do one of the following:
To view the active document in the default external browser, press F11.
To switch to a different browser, click the View External Browser List button on
the View toolbar, and select a browser from the list.
Tip
To update the page in the browser after making changes to the file you can click the
browser's Refresh/Reload button or press F11 again.
Prompt to save changes to the current document Asks you whether or
not to save the active document before opening it in the external browser
Automatically save changes to the current document Saves the active
document before opening it in the external browser
Browse using a temporary copy (no need to save) Copies the active
document and opens this copy in the external browser (this option is handy
when making many edits to a page but it requires more system resources)
Chapter 2 Configuring Browsers and Servers