Using The Cse Html Validator - MACROMEDIA COLDFUSION STUDIO 5-USING COLDFUSION 5 STUDIO Use Manual

Validating Code
To validate the contents of a single tag, do one of the following:
Manually validate a tag by positioning the cursor inside the tag and selecting
Tools > Validate Current Tag from the menu.
Validate each tag as you type by opening the Options > Settings > Validation
pane, selecting Tag validation - validates the current tag when the ">" key is
typed, and clicking Apply.
When you work in the Editor, the validator checks every tag that you write as soon
as you type its closing bracket (
If something is wrong in the tag, an error message appears in red in the status bar.

Using the CSE HTML Validator

If you have installed this HTML validation tool, you can run it from ColdFusion
Studio. The CSE Validator supports multiple languages and contains other useful
features.
For more information, open the Options > Settings >Validation pane and click the
CSE HTML Validator link to visit their Web site.
To use the CSE HTML Validator:
1 In the Options > Settings > Validation pane, select Use CSE HTML Validator
when validating the entire document.
2 Click Configure CSE.
3 Complete the CSE HTML Validator Pro Configuration Editor dialog box.
For a description of each field on a tab, click the Help button.
4 Click CSE Options.
5 Complete the Validator Engine Options (Validator/Logging/Tools/Network)
dialog box.
For a description of each field on a tab, click the Help button.
6 (Optional) To visit their Web site, click the CSE HTML Validator link.
7 When you are done, click Apply.
).
>
105