Configuring External Browsers - MACROMEDIA COLDFUSION STUDIO 5-USING COLDFUSION 5 STUDIO Use Manual

Configuring External Browsers

Configuring External Browsers
As part of the installation process, the program compiles a list of the Web browsers it
detects on your system. You can view, add, edit, and delete browsers; you can change
the default browser; and you can set the browsers' file saving behavior.
To view the list of browsers:
Select Options > Configure External Browsers.
The External Browsers dialog box appears, listing the browsers it detects and
providing options to change the default browser; add, edit, or delete browsers; or
set how an active document is handled when opening it in a browser.
To add a browser to the list:
1 Select Options > Configure External Browsers to open the External Browsers
dialog box, if it is not already open.
2 Make sure the browser is already installed on your machine, then click Add.
3 Complete the Browser dialog box as follows:
4 Click OK. The new browser appears in the list in the External Browsers dialog box.
5 Click OK to save your changes.
To edit a browser in the list:
1 Select Options > Configure External Browsers to open the External Browsers
dialog box, if it is not already open.
2 Click the browser to change and click Edit.
3 Change values in the Browser dialog box as needed:
4 Click OK to close the Browser dialog box.
5 Click OK to save your changes and close the External Browsers dialog box.
In the Name box, type a name for the new browser.
Click the file button beside the Location box, find the browser program file,
and click Open.
Type a different name for the browser in the Name box
Specify whether or not the browser uses DDE
Choose a different program file for the browser (for example, for a later
version of the browser)
11