MACROMEDIA COLDFUSION MX-CLUSTERCATS Use Manual page 96

4 Click the New Probe button
The JRun Application Probe settings dialog box appears:
5 Configure the application probe settings as described in the following table:
86 Chapter 4 Configuring Clusters
Field Description
Web Server Select the name of the server from the drop-down list.
Pathname Enter the absolute path to the JRun probe. Do not change the default
selection unless you installed JRun to a directory other than the
default installation directory.
Working Enter the absolute path to the probe's working directory. Do not
directory change the default selection unless you installed JRun to a directory
other than the default installation directory.
Startup Enter parameters passed to the probe on execution using the
parameters following syntax:
URL success_string [RESTART|NORESTART|
<JRun_server>] [LOG|NOLOG]
URL — enter the actual URL of the page you want the probe to test. By
default, this is http://<your_server>/btauxdir/jrunprobe.jsp. The probe
opens the page and searches for the success_string.
success_string — enter a text string that appears at the page
specified by the URL. If the success_string includes spaces, it must
be enclosed in quotation marks.
RESTART|NORESTART — enter RESTART to make the probe
automatically restart the default JRun server on probe failure. Enter
NORESTART if you do not want ClusterCATS to restart the JRun server
on a failure. If you installed JRun as a service, replace RESTART with
Service-<service_name> to restart a particular service, or replace
RESTART with the name of a specific JRun server (such as admin) to
restart.
LOG|NOLOG — enter LOG to enable logging for the ClusterCATS
application probe or NOLOG to disable it. The probe logs are stored in
the /<CC_install_directory>/log/ directory.
The default for Startup Parameters is http://<your_server>/btauxdir/
jrunprobe.jsp Hello NORESTART NOLOG
.