MACROMEDIA COLDFUSION MX-CLUSTERCATS Use Manual page 90

6 Click Register to create the probe.
7 Close all open dialog boxes.
Icons for the monitor and probe appear under the Monitor Manager in the
ClusterCATS Explorer.
To add a new probe to an existing probe monitor:
1 Open the ClusterCATS Explorer.
2 Select the cluster_name > Monitor Manager > monitor_name in the left pane.
3 Select Monitor > Properties. The monitor's Properties dialog box appears:
80 Chapter 4 Configuring Clusters
Field
Frequency (sec)
Return Value
Description
Enter a time, in seconds, to indicate how often the probe
checks the ColdFusion server.
Probes that restart web applications should be configured to
run no more frequently than the time it takes to stop and
restart ColdFusion. This time is highly site-specific, because
it depends on the system resources available on the servers
and the volume of traffic at the site.
For probes that do not restart the web application, the
Frequency depends on how long you can reasonably afford
to have your web application off-line. A minimum Frequency
of 15 seconds is recommended.
Enter 0 so that the probe succeeds on a successful probing
of the page. Enter a non-zero number to have the probe
succeed on a failure.
The default is 0. Only under rare circumstances would you
change this to a non-zero number.