MACROMEDIA COLDFUSION MX-CLUSTERCATS Use Manual page 129

8 To initially limit the amount of HTTP traffic sent to the server, return to
ClusterCATS Explorer and reconfigure the cluster member's peak load threshold to a
low value such as 10%.
9 Click OK.
10 In ClusterCATS Explorer, right-click a cluster member and select Monitor > Load.
The Server Load monitor appears:
11 Observe your cluster member at low usage levels until you are satisfied that your new
changes are working properly.
12 When you are certain that the updates you made have not adversely affected the
server's operation, set the peak and gradual redirection load thresholds back to their
original values.
Updating a cluster member (Windows only) 119