MACROMEDIA COLDFUSION MX-CLUSTERCATS Use Manual page 93

11 Click Register to create the probe. ClusterCATS begins to test the selected server
immediately.
Editing and removing ColdFusion probes
To edit or remove a ColdFusion probe:
1 Open the ClusterCATS Web Explorer, if it is not already open.
2 Click the Show Cluster link.
The Show Cluster page appears.
3 Enter the fully qualified host name of the server for which you want to configure the
ColdFusion probe in the Web Server Name field.
4 Click OK. The Cluster Member List page appears.
5 Click the Server Attributes link.
The Connect To Server page appears.
6 Select the server that hosts the probe in the Web Server Name lis tbox.
7 Click OK.
The selected server's Properties page appears.
8 Click the ColdFusion Probe link.
The Probe List page appears.
9 Select the probe to edit or remove.
10 To remove the probe, click Delete.
ClusterCATS removes the ColdFusion probe.
11 To edit the probe, click Edit.
A page with all the available probes appears.
12 Edit the fields corresponding to the probe that you want to change, and click
Register.
Using ColdFusion probes 83