MACROMEDIA COLDFUSION MX-CLUSTERCATS Use Manual page 66

4 Click Add to add available web servers to your cluster.
The Add New Server to Cluster dialog box appears:
5 Enter the fully qualified host name of a web server in the New Web Server Name field
(for example, doc.macromedia.com).
6 If you use the ClusterCATS dynamic IP addressing scheme and the maintenance IP
address is not bound to your NIC, select ClusterCATS Maintenance Support.
If you are not configuring this server for offline maintenance support, go to step 8.
Note: You can set the maintenance support option only when creating a cluster or
adding a cluster member to a cluster. You cannot configure or modify this option after
you have created and added the cluster member to the cluster.
Enabling maintenance support for clusters requires that you configure your cluster
for ClusterCATS dynamic IP addressing. For more information, see
dynamic IP addressing (Windows only)" on page
7 Enter the fully qualified host name of the maintenance address (for example,
serv1.yourcompany.com) in the Maintenance Address field.
8 Click OK.
9 Repeat steps 4 through 8 for each web server you want to add to the cluster, and then
click Next to proceed.
The Load Management dialog box appears:
56 Chapter 4 Configuring Clusters
"ClusterCATS
132.