MACROMEDIA COLDFUSION MX-CLUSTERCATS Use Manual page 81

The selected server's Server Properties page appears:
7 Click the Administration link under Server Attributes.
The Server Administration page appears for the selected server:
8 To change the peak load threshold, enter a new numeric value (less than 100%) in the
Standard Load Threshold field.
9 Enable the Gradual Redirection check box if it is not already enabled.
10 To change the Gradual Redirection load threshold, enter a new numeric value in the
Gradual Load Threshold field. This value must be lower than the standard load
threshold.
11 Click OK to apply your new load threshold settings.
Server load thresholds 71